StarTech.com Desk-Mount Dual Monitor Mount (ARMDUALV) user manual

Contents

1. Introductionp. 5

   Product diagram VESA monitor mount VESA monitor mount Upper pole Lower pole Cable-management clip Cable-management clip Pole connector Desk clamp

2. Product diagramp. 5

   VESA monitor mount VESA monitor mount Upper pole Lower pole Cable-management clip Cable-management clip Pole connector Desk clamp

3. Product dimensionsp. 6

   mm 35 mm 75 mm 100 mm 116 mm 75 mm 100 mm 113 mm 800 mm 100 mm min 10 mm to max 88 mm ±45° ±45° 360°

4. Technical specificationsp. 7

   Type of measurement Measurement VESA mounting hole pattern 75x75 100x100 Weight capacity Up to 10 kg (22 lb.) per monitor mount Tilt +450 to -450 Screen size…

5. Requirementsp. 11

   Two monitors or displays that are compatible with one of the VESA mounting hole patterns that ARMDUALV supports • A Phillips screwdriver Requirements are…

6. Assemblyp. 11

   Warning! Make sure that the weight of the monitors does not exceed the weight capacity of this product. If you exceed the weight capacity, you might experience…

7. Attach the ARMDUALV to your mounting surfacep. 11

   You can use either the desk clamp or grommet mount to attach the ARMDUALV to your mounting surface. Use the desk clamp to attach the ARMDUALV 1. Remove the…

8. Attach a VESA monitor mountp. 16

   1. Slide one of the VESA monitor mounts down the lower pole. 2. When the VESA monitor mount is at the desired height, use the 5 mm hex key to tighten the screw…

9. Attach the upper polep. 17

   1. Screw the pole connector onto the end of the lower pole. 2. Thread the other cable-management clip onto the end of the upper pole. 3. Screw the upper pole…

10. Attach the second VESA monitor mountp. 18

    1. Slide the other VESA monitor mount down the upper pole. 2. When the VESA monitor mount is at the desired height, use the 5 mm hex key to tighten the screw…

11. Attach monitors to the VESA monitor mountsp. 19

    Warning! Attaching a monitor is a two-person job. Do not attempt to complete this task by yourself. ARMDUALV is designed to be used with monitors that are the…

12. Adjust the tilt angle of your monitorp. 23

    1. To change the angle that the monitor is tilted at, use the 6 mm hex key to turn the screw in the side of the VESA monitor mount counterclockwise. 2. When…

13. Manage your cablesp. 24

    Run your monitor cables down the length of both poles and through the cable-management clips located on the poles. (figure 21) figure 21 Cable-management clip…

14. Technical supportp. 25

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

15. Warranty informationp. 25

    This product is backed by a three-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…

Other documents for this model

• StarTech.com Desk-Mount Dual Monitor Mount (ARMDUALV) user manual