Loading manual…
Cisco Epson TM-T88V (042): Serial, PS, EDG, EU (C31CA85042) user manual
- Type
- User manual
- Language
- English
- Pages
- 18
- Models
- C31CA85042
Open PDFOpens the file on objects.icecat.biz.
Contents
- Important Safety Informationp. 3
This section presents important information intended to ensure safe and effective use of this product. Read this section carefully and store it in an…
- Key to Symbolsp. 3
The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. WARNING…
- Safety Precautionsp. 3
WARNING: Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the…
- Caution Labelsp. 4
The caution labels on the product indicate the following precautions. CAUTION: Do not touch the thermal head and the frame on its side because it can be very…
- Restriction of Usep. 4
When this product is used for applications requiring high reliability/safety, such as transportation devices related to aviation, rail, marine, automotive…
- Unpackingp. 4
The following items are included with the standard specification printer. If any item is damaged, contact your dealer. ❏ Printer ❑ Roll paper ❏ Connector cover…
- Downloading Drivers, Utilities, and Manualsp. 5
The latest versions of drivers, utilities, and manuals can be downloaded from one of the following URLs. For customers in North America, go to the following…
- Precautions When Installing the Power Supply Coverp. 5
A description of EMI standards is on the bottom of the printer. When the optional power supply cover (OT-BX88V) is installed, it is hard to check it. In such…
- Part Namesp. 5
Control Panel (Power) LED This LED is on when the printer is on. Error LED This indicates an error. Paper LED On indicates a paper near end or out. Flashing…
- Control Panelp. 5
(Power) LED This LED is on when the printer is on. Error LED This indicates an error. Paper LED On indicates a paper near end or out. Flashing indicates…
- Installing the Printer Horizontally or Verticallyp. 6
You can install the printer horizontally on a flat surface (with the paper exit on top) or vertically (with the paper exit at the front) by hanging it on a…
- Setting Up the Printerp. 6
To set up the printer, follow the steps below. 1. Connect the cables. 2. Attach the connector cover. 3. Arrange the cables. 4. Install the roll paper
- Connecting the Cablesp. 6
CAUTION: For a serial interface, use a null modem cable. For a parallel interface, use an IEEE 1284 cable. For a USB interface, do not turn on the printer…
- Attaching the Connector Coverp. 7
Follow the steps below to attach the connector cover to protect the cables. 1. Turn over the printer. 2. Position the two hooks on both sides of the connector…
- Arranging the Cablesp. 8
Pass the cables through cable exits in the connector cover. The connector cover has cable exits on the back and both sides. You can also route the serial, USB…
- Installing Roll Paperp. 9
Follow the steps below to install the roll paper. If you want to change the paper width by using the roll paper guide, see "Changing the Paper Width" on page…
- Attaching the Power Switch Coverp. 10
The enclosed power switch cover ensures that the power switch is not pressed accidentally. You can turn on and off the power switch by inserting a sharppointed…
- Changing the Paper Widthp. 11
If a roll paper guide is included with your printer, you can change the paper width from 80 mm to 58 mm by installing the roll paper guide. Follow the steps…
- Troubleshootingp. 12
No lights on the control panel Check whether the power supply cable is correctly connected to the printer and the socket. Error LED on with no printing ❏ Check…
- Removing Jammed Paperp. 13
When a paper jam occurs, never pull out the paper forcibly. Open the roll paper cover and remove the jammed paper. CAUTION: Do not touch the thermal head and…
- Cleaningp. 14
the Printer Case Be sure to turn off the printer, and wipe the dirt off the printer case with a dry cloth or a damp cloth. CAUTION: Never clean the product…
- Cleaning the Printer Casep. 14
Be sure to turn off the printer, and wipe the dirt off the printer case with a dry cloth or a damp cloth. CAUTION: Never clean the product with alcohol…
- Cleaning the Thermal Headp. 14
CAUTION: After printing, the thermal head and the frame on its side (indicated in the circle in illustration below) can be very hot. Be careful not to touch it…
- Setting the DIP Switchesp. 15
CAUTION: Be sure to turn off the printer before removing the cover of the DIP switches. Removing it while the printer is turned on may cause problems such as…
- DIP Switch Tablesp. 16
When using Serial Interface *1: When DIP switches 1-7 and 1-8 are on, the transmission speed can be selected from one of seven speeds: 2400, 4800, 9600, 19200…
- Specificationsp. 17
DIP Switch Bank 1 SW Function ON OFF 1-1 Auto line feed Always enabled Always disabled 1-2 Receive buffer capacity 45 bytes 4KB 1-3~ 1-8*1 Undefined SW…