Loading manual…
Loading manual…
The FLATPNLCEIL is a full-motion ceiling mount that’s designed to give you an easy way to suspend your flat-panel television from a ceiling or other overhead…
Ceiling mount and pole Extension pole Vertical bracket Vertical bracket Horizontal bracket
Type of measurement Measurement VESA mounting hole pattern 200x200 300x300 400x200 400x400 600x400 Weight capacity Up to 110 lb. (50 kg) Tilt +00 to -250…
Warning! Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience…
Warning! Ceiling structures vary, and it’s important to make sure that the type of structure and mounting hardware that you’re using will properly support the…
1. Place one end of the cable through the top hole in the ceiling mount and pole (1). 2. Run the cable through the ceiling mount and pole and the extension…
1. Use a wrench to remove the retainer nut from the back of the horizontal bracket (4). (figure 5) 2. Loosen the two nuts at the back of the horizontal…
To accommodate different TV designs, the FLATPNLCEIL comes with three sets of screws of different lengths and diameters, and two sizes of spacers. To select…
Warning! Do not over-tighten the screws. If you encounter resistance while you’re tightening the screws, stop tightening. Failure to do so could result in…
Warning! Attaching the TV is a two-person job. Do not attempt to hang the TV by yourself. 1. Carefully lift up the TV and hook the mounting hardware on the…
1. Do any of the following: • To adjust the tilt of the TV, loosen the nuts on the side of the horizontal bracket. Adjust the TV to the position that you want…
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…
This product is backed by a five-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…