StarTech.com Full Motion TV Wall Mount (FPWARTB1M) user manual

Contents

1. Technical specificationsp. 5

   Unless otherwise indicated, the technical specifications in the table below apply to the TV or display. Type of measurement Measurement VESA mounting hole…

2. Requirementsp. 9

   A display or TV that is compatible with one of the VESA mounting hole patterns FPWARTB1M supports • A Phillips screwdriver Requirements are subject to change.…

3. Installationp. 10

   Prepare FPWARTB1M for mounting 1. Remove the center decorative cover from the wall mount. 2. Remove the top and bottom decorative covers from the wall mount.…

4. Prepare FPWARTB1M for mountingp. 10

   1. Remove the center decorative cover from the wall mount. 2. Remove the top and bottom decorative covers from the wall mount. 3. Use the wrench provided to…

5. Attach the wall mount to the wallp. 11

   The wall mount is designed to be installed on a wood stud, solid concrete, or cinder block wall. The wall structure should be capable of supporting at least…

6. Reattach the decorative coversp. 12

   1. When the wall mount is attached to the wall, snap the top and bottom decorative covers back onto the wall mount. 2. Snap the center decorative cover onto…

7. Assemble the TV mountp. 13

   If the mounting holes on the TV mount aren’t compatible with the mounting holes on your TV or display, you can use the VESA mount extensions to create a…

8. Mount a TV with a flush mounting surfacep. 16

   To accommodate different TV designs, the FPWARTB1M comes with five sets of screws of different lengths and diameters, two sizes of washers, and two sizes of…

9. Mount a TV with a recessed mounting surfacep. 17
10. Attach the TV to the wall mountp. 19

    Warning! Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience…

11. Route the cablesp. 20

    1. Remove the decorative covers from the arms of the wall mount. 2. Position the cables in the decorative covers and reattach them to the arms of the wall…

12. Adjust the tilt and swivel angle of the TVp. 21

    1. Use the provided wrench to loosen the bolts in the side of the TV mount. 2. Position the TV at the angle that you want. 3. Use the provided wrench to…

13. Technical supportp. 22

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

14. Warranty informationp. 22

    This product is backed by a five-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…