StarTech.com Desk-Mount Dual Monitor Arm (ARMDUAL30) user manual

Contents

1. Introductionp. 3

   The ARMDUAL30 is a full-articulation monitor mount that lets you mount and display your monitors in the setup that works best for you. The snap-and-release…

2. Product diagramsp. 4

   VESA monitor mount VESA monitor mount Spring arm Spring arm Swivel arm Swivel arm Dual mount 2-in-1 desk or grommet mount (grommet pictured) Cable manager

3. Technical specificationsp. 5

   Type of movement Measurement Lift 160 mm Angle 1000 Pivot 3600 Swivel 3600 Pan 2400 Tilt 1050 Extension 590 mm Vertical 270 mm Weight load Do not exceed 20 kg

4. Attach the ARMDUAL30 to a desk or tablep. 6

   , attach the monitor arms, attach the monitors, and route the monitor cables. Attach the ARMDUAL30 to a desk or table By default, the ARMDUAL30 comes with the…

5. Convert the desk mount to a grommet mountp. 6

   1. Turn the 2-in-1 desk mount (1) over so that the pole faces downwards. Use one of the M3 Allen keys (3) to remove the four M5x14 mm hex screws that are…

6. Convert the grommet mount to a desk mountp. 7

   By default, the ARMDUAL30 comes with the desk mount preassembled. If you assemble the grommet mount and want to switch back to a desk mount, you will need to…

7. Use the grommet mount to attach the ARMDUAL30p. 8

   1. Remove the plastic from the base cushion (4) and attach it to the bottom of the base mount. Make sure that you line up the hole on the base mount with the…

8. Use the 2-in-1 desk mount to attach the ARMDUAL30p. 9
9. Attach the monitor armsp. 10

   Set up the monitors side-by-side Note: If you want to position your monitors side by side at exactly the same height, use the dual mount to attach the monitor…

10. Set up the monitors side-by-sidep. 10

    Note: If you want to position your monitors side by side at exactly the same height, use the dual mount to attach the monitor arms. Using the dual mount adds…

11. Stack the monitors verticallyp. 11

    There are two ways that you can assemble the ARMDUAL30 so that the monitors are positioned vertically: • Attach the monitor arms without the dual mount. • Use…

12. Attach the monitorsp. 15

    If you’re positioning the monitors side-by-side, the maximum recommended size of monitors that you can use is 30 inches. Warning! Each of the spring arms has…

13. Route the monitor cablesp. 16

    The ARMDUAL30 comes with a cable manager that you can use to direct the monitor cables down the mounting arms and out of your working area. Make sure that the…

14. Disassemble the ARMDUAL30p. 17

    1. Remove the thumbscrews (8) from the back of the monitors and the monitor mounts (7). Warning! Make sure that you lift the mounting arm up to its highest…

15. Technical supportp. 18

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

16. Warranty informationp. 18

    This product is backed by a ten-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following…

Other documents for this model

• StarTech.com Desk-Mount Dual Monitor Arm (ARMDUAL30) user manual