StarTech.com HSB220SAT25B user manual

Contents

1. Introductionp. 4

   Thank you for purchasing a StarTech.com 3.5” Dual SATA Hard Drive Hot-Swap Bay - the ideal solution for simplifying drive removals and insertions as part of…

2. Featuresp. 4

   Driverless operation, tool-less hard drive installation • Supports Hot Swapping • Supports data transfer rates of up to 6.0 Gbps (SATA III), 3Gbps (SATA II)…

3. Installation and Usagep. 5

   Hardware Installation To prepare HSB220SAT25B for installation within the computer: 1. Connect the 15-pin SATA Power Connector and 4-pin LED connector…

4. Hardware Installationp. 5

   To prepare HSB220SAT25B for installation within the computer: 1. Connect the 15-pin SATA Power Connector and 4-pin LED connector (provided by an included…

5. Drive Installationp. 6

   Once HSB220SAT25B has been secured within the computer casing, and connected appropriately: 1. Open the front panel doors by gently sliding the locking button…

6. Drive Removalp. 8

   To remove a drive from HSB220SAT25B: 1. Open the front panel door by gently sliding the locking button from left to right. 2. Gently pull the door open to…

7. Specificationsp. 9

   Bus Type SATA I, SATA II, SATA II Supported Drive Form Factor 9.5 mm, 2.5” SATA/DRIVES Connector Types 2 x 15-pin SATA Power Female (external) 2 x 15-pin SATA…

8. Technical Supportp. 10

   StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

9. Warranty Informationp. 10

   This product is backed by a two year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods…