Loading manual…
Loading manual…
This accessory for the HP Pro Scanner is designed to stack sheets of paper of the same size scanned as a batch. It has been designed for optimal performance…
The output tray has approximately the following dimensions: 1150 mm long × 1190 mm wide × 1200 mm high (45.3 × 46.9 × 47.2 in). You are recommended to allow…
1. Upper tray 2. Paper stoppers (2) 3. Central tray 4. Lower tray 5. Wheels 6. Angle selector touch zone 7. Angle selector 8. Angle knob 9. Height adjusters…
1. Take a sheet of paper of the size that you intend to scan. 2. Preinstall the stoppers in the central or lower tray area, depending on the paper size. HP…
You may be able to improve the sliding and stacking of the originals on the output tray by adjusting its angle of slope. The ideal angle could vary with paper…
The angle of the output tray should be adjusted so that the scanned sheets of paper fall freely from the scanner to the tray without jamming. The stoppers…
You can fold the output tray for storage so that it takes up less space: 1. Set the tray to a steep angle (see Tray angle adjustment on page 6). 2. Fold the…
HP product Limited Warranty Period HP hardware product 1 year HP software product 90 days
1. HP warrants to you, the end-user customer, that the HP hardware products will be free from defects in materials and workmanship under normal usage during…
1. This Limited Warranty gives you specific legal rights. You may also have other rights which vary from state to state in the United States, from province to…
Refer to the printer's documentation and HP's websites (http://www.hp.com/go/certificates/ and http://www.hp.com/go/environment/) to find relevant safety…