Dell E2222HS (DELL-E2222HS) user manual

Contents

1. About your monitorp. 5

   │ 5 About your monitor Package contents Your monitor ships with the components indicated in the table. Ensure that you have received all the components and see…

2. Product featuresp. 6

   The Dell E2222HS flat panel monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) Panel with LED backlight. The monitor…

3. Identifying features and controlsp. 7

   Front view Label Description Use 1 Function buttons To access the OSD menu and change the settings if required. For more information, see Using the front panel…

4. Pin assignmentsp. 15
5. Plug and play capabilityp. 18

   You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification…

6. LCD monitor quality and pixel policyp. 18

   During the LCD Monitor manufacturing process, it is normal for one or more pixels to become fixed in an unchanging state, which are hard to see and do not…

7. Maintenance guidelinesp. 18

   Cleaning your monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety…

8. Setting up the monitorp. 19

   │ 19 Setting up the monitor

9. Connecting the standp. 19

   NOTE: The stand is not attached when the monitor is shipped from the factory. NOTE: The following procedure is applicable for the stand that shipped with your…

10. Connecting your monitorp. 20

    WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. NOTE: Do not connect all cables to the computer at the same…

11. Organizing cablesp. 21

    Use the cable-management clip to route the cables connected to your monitor. 3C0181Y00-xxx-G(A)xx DELL E2222HS Flat Panel Monitor/液晶显示器 型号:E2222HS 输入电源…

12. Removing the standp. 22

    NOTE: To prevent scratches on the screen when removing the stand, ensure that the monitor is placed on a soft and clean surface. NOTE: The following procedure…

13. Operating your monitorp. 24

    Turning on the monitor Press the button to turn on the monitor

14. Turning on the monitorp. 24

    Press the button to turn on the monitor

15. Using the front panel controlsp. 24

    Use the control buttons at the bottom edge of the monitor to adjust the image being displayed. 1 2 3 4 5 The following table describes the control buttons…

16. Using the OSD lock functionp. 25

    You can lock the front-panel control buttons to prevent access to the OSD menu and/ or power button. Use the Lock menu to lock the button(s). 1. Select one of…

17. Using the On-Screen Display (OSD) menup. 29

    Accessing the OSD menu NOTE: Any changes you make are automatically saved when you move to another menu, exit the OSD menu, or wait for the OSD menu to close…

18. Setting up display resolution on your monitorp. 42

    Setting display resolution to 1920 x 1080 For best performance, set the display resolution to 1920 x 1080 pixels by performing the following steps: In Windows…

19. Using tiltp. 44

    You can tilt the monitor for the most comfortable viewing angle. NOTE: The stand is not attached when the monitor is shipped from the factory.

20. Troubleshootingp. 45

    │ 45 Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety instructions

21. Self-testp. 45

    Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected…

22. Built-in diagnosticsp. 46

    Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with…

23. Common problemsp. 47

    The following table provides general information about common monitor problems you might encounter and the possible solutions: Common symptoms Possible…

24. Product-specific problemsp. 49

    Specific symptoms Possible solutions Screen image is too small • Check the Aspect Ratio setting in the Display settings OSD. • Reset the monitor to Factory…

25. Appendixp. 50

    Safety instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock…

26. FCC Notices (U.S. Only) and Other Regulatory Informationp. 50

    For FCC notices and other regulatory information, see the regulatory compliance website located at https://www.dell.com/regulatory_compliance. Install your…

27. Contact Dellp. 50

    For customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information…

28. EU product database for energy label and product information sheetp. 50

    E2222HS: https://eprel.ec.europa.eu/screen/qr/605451