Dell UPS Network Management Card 2 (AP9630) installation instructions

Contents

1. Preliminary Informationp. 7

   Features The AP9630 Network Management Card: • Provides UPS control and self-test scheduling features. • Provides data and event logs. • Enables you to set up…

2. Installation in a UPSp. 11

   How to install the card for different UPS models To view the full list of compatible UPS in which an NMC 2 can be installed, see Knowledge Base article…

3. Expansion/Triple Chassis Installationp. 13

   When to use an Expansion Chassis Use an Expansion Chassis or a Triple Expansion Chassis if the UPS has no card slot available. The Single (AP9600) or Triple…

4. Quick Configurationp. 15

   Overview Disregard the procedures described in this chapter if you have StruxureWare Data Center Expert as part of your system. See the documentation for your…

5. How to Recover from a Lost Passwordp. 23

   You can use a local computer that connects to the Network Management Card through the serial port to access the command line interface. 1. Select a serial port…

6. How to Access a Configured Network Management Cardp. 24

   Overview After the UPS Network Management Card (NMC 2) is running on your network, you can use the interfaces summarized here: Web interface, Telnet, SSH…

7. How to Install Multiple Management Cardsp. 27

   Overview When installing more than one management card, such as the Network Management Card 2 (NMC 2), the Out of Band Management Card, etc., you must install…

8. Specifications AP9630, AP9631p. 31

   Physical Size (H x W x D) 38.1 x 120.7 x 108.0 mm (1.50 x 4.75 x 4.25 in) Weight 0.14 kg (0.30 lb) Shipping weight 0.91 kg (2.00 lb) Environmental Elevation…

9. Specifications AP9635p. 32
10. Blank Pagep. 4