TP-Link Archer MR200 user manual

Contents

1. About This Guidep. 5

   This guide provides details of each function and shows how to configure the router appropriate to your needs. In addition to this guide, a Quick Installation…

2. Get to Know About Your 4G LTE Routerp. 6

   This chapter introduces what the router can do and shows its main features and appearance. This chapter contains the following sections: • Product Overview •…

3. Connect the Hardwarep. 12

   This chapter contains the following sections: • Requirements for Operation • Position Your 4G LTE Router • Connect Your 4G LTE Router

4. Log into Your 4G LTE Routerp. 16
5. Set Up Internet Connectionsp. 18

   This chapter introduces how to connect your router to the Internet. The router is equipped with a web-based Quick Setup wizard. It has many ISP information…

6. Bandwidth Controlp. 22

   The Bandwidth Control feature is used to fully utilize your limited bandwidth and optimize the load respectively. With this feature enabled, you can assign a…

7. Network Securityp. 26

   This chapter guides you on how to protect your home network from unauthorized users by implementing these three network security functions. You can block or…

8. Parental Controlsp. 32

   This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time.

9. SMSp. 36

   This chapter introduces how to use the SMS functions to view and write messages, keep drafts and specify the message center number. You can easily monitor your…

10. Guest Networkp. 40

    This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace…

11. NAT Forwardingp. 43

    Router’s NAT (Network Address Translation) feature makes the devices in the LAN use the same public IP address to communicate in the Internet, which protects…

12. Specify Your Network Settingsp. 49

    This chapter introduces how to change the default settings or adjust the basic configuration of the router using the web-based management page. This chapter…

13. Administrate Your Networkp. 69

    This chapter introduces how to change the system settings and administrate your router’s network. This chapter contains the following sections: • Set System…

14. Appendix A: Specificationsp. 81

    HARDWARE FEATURES Interface 1 10/100Mbps RJ45 WAN/LAN Port 3 10/100Mbps RJ45 LAN Ports 1SIM Card Slot Button 1 Power On/Off Button 1 Wi-Fi On/Off Button 1…

15. Appendix B: Troubleshootingp. 83

    T1. How do I restore my router’s configuration to its factory default settings? With the router powered on, press and hold the WPS/RESET button on the rear…

Other documents for this model

• TP-Link 300 Mbps Wireless N 4G LTE Router (TL-MR6400 V4) installation instructions