Dell Dock – WD19S 130W (DELL-WD19S130W) user manual

Contents

1. Dell Docking Station WD19S User Guidep. 1

   Regulatory Model: K20A Regulatory Type: K20A001 November 2024 Rev. A04

2. Introductionp. 4

   The Dell Docking Station WD19S is a device that links all your electronic devices to your system using a cable interface. Connecting the system to the docking…

3. What's in the boxp. 5

   Your docking station ships with the components shown below: 1. Docking station 2. Power adapter and power cord 3. Documentation (Quick Start Guide and Safety…

4. Hardware requirementsp. 6

   Before using the docking station, ensure that your system has a DisplayPort over USB Type-C designed to support the docking station. NOTE: Dell Docking…

5. Identifying Parts and Featuresp. 7

   Figure 1. Top view 1. Sleep/Wake up/Power button NOTE: The dock button is designed to replicate your system's power button. If you connect the Dell Docking…

6. Important Informationp. 11

   Dell Docking Station drivers (Realtek USB GBE Ethernet Controller Driver) are required to be installed before using the docking station for full functionality.…

7. Quick Setup of Hardwarep. 12

   Steps 1. Update your system's BIOS, graphics and drivers from www.dell.com/support/drivers. 6 12 Quick Setup of Hardware

8. Setup of External Monitorsp. 17
9. Updating the graphics drivers for your computerp. 17

   Configuring your Monitors • Display bandwidth • Display Resolution Table Updating the graphics drivers for your computer The Microsoft Windows operating…

10. Configuring your Monitorsp. 17

    Display bandwidth • Display Resolution Table Updating the graphics drivers for your computer The Microsoft Windows operating systems include the VGA graphics…

11. Display bandwidthp. 18

    External monitors require a certain amount of bandwidth to work properly. Monitors with higher resolution require more bandwidth. • DisplayPort High Bit Rate 2…

12. Display Resolution Tablep. 18

    Table 2. WD19S Display Port Available Bandwidth Single Display (maximum resolution) Dual Display (maximum resolution) Triple Display (maximum resolution) Quad…

13. Removing the USB Type-C cable modulep. 21

    Prerequisites The Dell Docking Station WD19S is shipped with the USB Type-C cable attached. To remove/change the cable module, follow these steps: Steps 1.…

14. Technical specificationsp. 25
15. LED Status Indicatorsp. 25

    Docking specifications • Input/Output (I/O) Connectors • Dell ExpressCharge and ExpressCharge Boost overview LED Status Indicators Power Adapter LED Table 3.…

16. Docking specificationsp. 25

    Input/Output (I/O) Connectors • Dell ExpressCharge and ExpressCharge Boost overview LED Status Indicators Power Adapter LED Table 3. Power Adapter LED…

17. Input/Output (I/O) Connectorsp. 27

    The Dell Docking Station WD19S has the following I/O connectors: Table 10. I/O connectors Ports Connectors Video Ports • DisplayPort++ 1.4 x2 • USB 3.2 Gen2…

18. Dell ExpressCharge and ExpressCharge Boost overviewp. 27

    Dell ExpressCharge enables an empty battery to charge to 80% in about one hour when the system is turned off and to 100% in approximately two hours. • Dell…

19. Dell docking station firmware updatep. 28

    Standalone Dock Firmware Update utility NOTE: Information that is provided is for Windows users running the executable tool. For other operating systems or…

20. Frequently asked questionsp. 31

    1. The fan is not working after connecting with the system. • The fan is triggered by temperature. The dock fan will not rotate until the dock is hot enough to…

21. Troubleshooting the Dell Docking Station WD19Sp. 32
22. Symptoms and solutionsp. 32

    Table 14. Symptoms and solutions Symptoms Suggested solutions No video on the monitors that are attached to the High Definition Multimedia Interface (HDMI), or…

23. Getting helpp. 35
24. Contacting Dellp. 35

    Prerequisites NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell…