LG E2711T user manual

Contents

1. Important Precautionsp. 2
2. On Safetyp. 2

   Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not…

3. On Installationp. 3

   Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display…

4. On Cleaningp. 4

   Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen…

5. On Repackingp. 4

   Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location…

6. On Disposalp. 4

   Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local…

7. Accessoriesp. 5

   !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.…

8. Connecting the Displayp. 6

   Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off

9. Connecting the standp. 6

   1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. 3.…

10. Removing the stand basep. 7

    1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. When you desire to disintegrate the monitor from the stand base, use a coin…

11. Positioning your displayp. 8

    After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚ to 15˚ ERGONOMIC…

12. Connecting with the PCp. 9

    2 Wall-outlet type Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on…

13. Control Panel Functionsp. 10

    Front Panel Controls MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently…

14. Front Panel Controlsp. 10

    MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the…

15. On Screen Display (OSD) Control Adjustmentp. 12

    Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control…

16. Screen Adjustmentp. 12

    Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short…

17. On Screen Display(OSD) Selection and Adjustmentp. 13

    The following table indicates all the On Screen Display control, adjustment, and setting menus. : D-SUB(Analog signal) input : DVI-D(Digital signal) input DSUB…

18. MENUp. 14

    Submenus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name Icons Button Tip Exit Adjust (Decrease/Increase)…

19. SUPER ENERGY SAVINGp. 17

    Button, then the main menu of the OSD appears. Exit Move Restart to select sub-menu

20. Troubleshootingp. 20

    No image appears Check the following before calling for service. No image appears

21. No image appearsp. 20

    Check the following before calling for service. No image appears

22. Do you see a "OSD LOCKED" message on the screen?p. 20

    G Is the power cord of the display connected? G Is the power indicator light on? G Is the power indicator flickering? G Do you see an "OUT OF RANGE" message on…

23. Display image is incorrectp. 21

    G Display Position is incorrect. G On the screen background, vertical bars or stripes are visible. G Any horizontal noise appearing in any image or characters…

24. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?p. 22

    G Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you…

25. Specificationsp. 23

    E2711T 68.6 cm (27 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 68.6 cm 0.3114 mm x 0.3114 mm (Pixel pitch) Display…

26. Preset Modes (Resolution)p. 24

    Indicator On Mode Sleep Mode Off Mode White White Blinking Off LED Color MODE

27. Indicatorp. 24

    On Mode Sleep Mode Off Mode White White Blinking Off LED Color MODE

28. Installing the Wall mount platep. 25

    This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. After moving the product to face downward, make sure to place…