LG 27EB22PY user manual

Contents

1. Accessoriesp. 2

   !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.…

2. Connecting the Displayp. 3

   Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off. Connecting the stand base…

3. Connecting the stand base or Removing the stand basep. 3
4. Positioning your displayp. 5

   After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range Swivel Range : 355˚

5. Using the Pivot functionp. 7

   Stand section Head section

6. Connecting with the PCp. 8

   2 Wall-outlet type Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on…

7. Connecting the USB(Universal Serial Bus) Cablep. 10

   1. You can use the USB port at the back of the monitor to connect peripherals (USB mouse, USB keyboard, etc.) to the monitor, not to the computer. 2. The…

8. Control Panel Functionsp. 11

   Front Panel Controls MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently…

9. Front Panel Controlsp. 11

   MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the…

10. On Screen Display (OSD) Control Adjustmentp. 13

    Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control…

11. Screen Adjustmentp. 13

    Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short…

12. On Screen Display(OSD) Selection and Adjustmentp. 14

    The following table indicates all the On Screen Display control, adjustment, and setting menus. : D-SUB(Analog signal) input : DVI-D(Digital signal) input …

13. VOLUMEp. 16

    of headphone/Speaker. 15

14. BRIGHTNESSp. 16

    of the screen. Change the input image signal ratio to original. WIDE ORIGINAL Switch to full screen mode according to input image signal. * This function works…

15. ORIGINAL RATIOp. 16
16. COLOR TEMPp. 16

    erature . • MEDIUM: Set the screen to medium color temperature. • COOL: Set the screen to cool color temperature. USER To adjust the volume of…

17. CONTRASTp. 17

    of the screen. Exit : Exit , , : Move : Select another sub-menu You can set the offset level. If you select 'HIGH', the screen will be bright and if you select…

18. BLACK LEVELp. 17
19. LANGUAGEp. 17

    in which the control names are displayed. Press the , buttons to reset immediately. Restore all factory default settings except "LANGUAGE." To adjust the…

20. FACTORY RESETp. 17
21. SUPER ENERGY SAVINGp. 18

    Button, then the main menu of the OSD appears. Exit Move Restart to select sub-menu 17

22. Troubleshootingp. 21

    No image appears Check the following before calling for service. No image appears

23. No image appearsp. 21

    Check the following before calling for service. No image appears

24. Do you see a "OSD LOCKED" message on the screen?p. 21

    G Is the power cord of the display connected? G Is the power indicator light on? G Is the power indicator flickering? G Do you see an "OUT OF RANGE" message on…

25. Display image is incorrectp. 22

    G The screen color is mono or abnormal. G The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. •…

26. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?p. 22

    G Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you…

27. Specificationsp. 23

    68.6 cm (27 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 68.6 cm 0.3114 x 0.3114 mm (Pixel pitch) Display Horizontal Freq.…

28. Preset Modes (Resolution)p. 25
29. Indicatorp. 25

    On Mode Sleep Mode Off Mode White White Blinking Off LED Color MODE 24

30. Installing the Wall mount platep. 26

    This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. After moving the product to face downward, make sure to place…