Loading manual…
Loading manual…
USB Direct Recording Records music from CD to your USB device
Records music from CD to your USB device
Views Full HD picture quality with simple setup
Playable Discs This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/ CD-R cannot be…
This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/ CD-R cannot be played on this…
MP3/ WMA music file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 kHz to 48 kHz (MP3)…
1 3 4 6 8 9 2 5 10 11 a DVD/CD Disc Drawer b Display window c Open/Close (B) d Function (F) Selects the function or input source. e Play/Pause (d/M) f Stop…
1 3 7 2 5 6 4 a Power cord b Speaker terminal c ANTENNA connector (FM) d SCART connector e MONITOR (VIDEO OUT) connector Connect to a TV with video inputs f…
3 4 2 5 Battery Installation Remove the battery cover on the rear of the Remote Control, and insert one (size AAA) battery with 4 and 5 matched correctly. • •…
Connect the MONITOR jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers
Connect the SCART jack on the unit to the SCART in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Optional Equipment…
Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. If your TV has only one output for audio (mono), connect it to the left (white) audio…
Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Removing the USB Device from the unit 1. Choose a different…
Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. Be sure to fully extend the FM wire…
Optional During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before…
Menu Language Select a language for the Setup menu and then on screen
Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the…
Initial Setting of the Area Code: When you use this unit for the first time, you have to set the Area Code. 1. Select the [Lock] menu and then press D. 2.…
1. Insert the disc by pressing OPEN/CLOSE or connect the USB device to the USB port. 2. Select the DVD/ CD or USB function by pressing FUNCTION. 3. Select a…
Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback…
r This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch…
i This unit can play discs with photo files. 1. Select the DVD/CD or USB function by pressing FUNCTION. 2. Press WS to select a folder, and then press ENTER. A…
Press MUTE to mute your unit. You can mute your unit, for example, to answer the telephone, the “MUTE” displayed in the display window
The screen saver appears when you leave the unit in stop mode for about five minutes
You must select the appropriate system mode for your TV system. If “NO DISC” appears in the display window, press and hold PAUSE/STEP (M) for more than five…
(ID3 TAG ) While playing an MP3 file containing file information, you can display the information by pressing DISPLAY
Be sure that both FM aerials are connected. (Refer to the page 17) Listening to the Radio 1. Press FUNCTION until FM appears in the display window. The last…
You can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press FUNCTION until FM appears in the display window. 2.…
1. Press and hold PROG./MEMO. for two seconds. “ERASE ALL” will flash up on the unit display. 2. Press PROG./MEMO. to erase all of the saved radio stations.…