Loading manual…
Loading manual…
About the “ ” Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not…
Video cable (1) Colour-coded Speaker Cables (3) Remote control (1) Batteries (2) FM antenna (1) Nero MediaHome4 Essentials software CD-ROM (1)
Blu-ray Disc Discs such as movies that can be purchased or rented. BD-R/RE discs that contain Movie, Music or Photo fi les. - - DVD-VIDEO 8 / 12 cm disc Discs…
Overall Available File extensions: “.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “ .mkv”, “.mp4”, “.mp3”, “.wma”, “.wav” Available fi le…
This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”. AVCHD…
8 2 3 4 5 6 7 9 a 1/\ (POWER) Button b Disc Tray c Remote sensor d Display window e Volume control f Z (OPEN/CLOSE) g PORT. IN h USB Port i Operation buttons…
Attaching the speakers to the player 1. Connect speaker wires to the main unit. Each speaker wire is colour-coded. Use matching colour wires for corresponding…
Make one of the following connections, depending on the capabilities of your existing equipment. HDMI connection (pages 17-18) Component Video connection (page…
Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using Y Pb Pr cables. You can hear the sound the through the…
The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME ( ).…
Connect the supplied antenna for listening to the radio. Antenna Connection Player NOTE After connecting the FM wire antenna, keep it as horizontal as…
You can enjoy the sound of your component with the analogue audio output jacks from the speakers of the system. Connect the analogue audio output jacks of your…
You can enjoy the sound of your portable audio player from the speakers of the system. Connect the headphones (or line out ) jack of the portable audio player…
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency…
Before setting the wired network, you need to connect the broadband internet to your home network. If there is a DHCP server on the local area network (LAN)…
Adjusting the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME ( ). 2. Use I/i to select the [Setup] and press ENTER…
You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed…