Philips wireless multiroom speaker BM7B/10 user manual

Contents

1. 1 Importantp. 4

   Safety • Make sure that there is enough free space around the product for ventilation. • Only use attachments or accessories specified by the manufacturer. •…

2. Safetyp. 4

   Make sure that there is enough free space around the product for ventilation. • Only use attachments or accessories specified by the manufacturer. • Use only…

3. 2 Your multiroom speakerp. 5

   Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at…

4. Introductionp. 5

   With the Philips izzylink speaker, you can: • listen to music from your Bluetoothenabled devices; • listen to music everywhere in your home through a group of…

5. What's in the boxp. 5

   Check and identify the contents of your package: • 1 x izzylink multiroom speaker • 1 x power adapter • Printed materials

6. Overview of the main unitp. 6

   a • Turn the speaker on or off. b SOURCE • Switch to the Bluetooth or AUDIO IN source. • In Bluetooth mode, press and hold for three seconds to disconnect the…

7. 3 Preparep. 8

   Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The…

8. Connect power and turn onp. 8

   Caution • Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the bottom of the speaker. • Risk of electric…

9. 4 Playp. 10

   EN 1 Press SOURCE repeatedly to switch to Bluetooth source and enter pairing mode. » » The indicator flashes blue. 2 On your Bluetooth device, enable Bluetooth…

10. Play in single modep. 10
11. Play in group modep. 12

    EN Play from the master to the whole group Note • In Bluetooth mode, music play pauses when there is an incoming call or video recording is in progress on the…

12. Control playp. 14

    EN 5 Other features Update firmware Warning • Always connect the speaker to AC power for firmware upgrade. • Never power off the speaker or unplug the USB mass…

13. 5 Other featuresp. 15

    English EN 6 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 X15W RMS…

14. Update firmwarep. 15
15. Reset group statusp. 15
16. 6 Product informationp. 16

    EN 7 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter…

17. Specificationsp. 16
18. 7 Troubleshootingp. 17

    English EN 8 Understand meanings of LED status (1) Group indicator status Meaning Off The speaker is powered off. The speaker is in single mode. Flashing green…

19. 8 Understand meanings of LED statusp. 18

    EN Solid green in full brightness The speaker is powered on when it acts as a slave in group mode. Solid white in half brightness The speaker switches to…

20. 9 Noticep. 20

    2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd.…

21. Written offerp. 20