LG SVM5H-F (55SVM5F-H) user manual

Contents

1. IMPORTANT PRECAUTIONSp. 3

   Please read these safety precautions carefully before using the product. WARNING Failure to follow those warnings may result in death, serious injury or damage…

2. Electrical Power Related Precautionsp. 3

   WARNING • Use only the power cord supplied with the unit or another manufacturer’s authorized cord. -- Failure to do so may result in fire or electrical shock…

3. Precautions In Installing the Productp. 5

   WARNING • Keep away from heat sources like heaters or open flames. -- Electrical shock, fire, malfunction or deformation may occur. • Keep the packing…

4. Precautions for Moving the Productp. 6

   WARNING • Make sure to turn off the product. -- You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the…

5. Precautions for Using/Cleaning the Productp. 7

   WARNING • Do not attempt to disassemble, repair or modify the product yourself. -- Fire or electric shock can occur. -- Contact LG Customer Service for repair.…

6. Product Disposal (Only, Hg lamp used LCD Monitor)p. 7

   The fluorescent lamp used in this product contains a small amount of mercury. • Do not dispose of this product with general household waste. • Disposal of this…

7. LICENSESp. 8

   Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface…

8. ASSEMBLY AND PREPARATIONp. 9

   CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of…

9. Optional Accessoriesp. 9

   Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations…

10. Parts and Buttonsp. 10

    Change the input signal. • : Accesses the main menus, or saves your input and exits the menus. • : Adjust the up and down. • : Moves left and right. • …

11. Portrait Layoutp. 11

    When installing in a portrait layout, rotate the monitor clockwise 90 degrees (when facing the screen)

12. Remove brackets before Installationp. 11

    Make sure that the protection pads are removed from each corner before installing the product. NOTE • Keep the removed protection pads in case you need to move…

13. Storage Method for Panel Protectionp. 12

    Correct Method 1 If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the…

14. Installing on a Wallp. 14

    To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it. Install the monitor at least 200 mm (7.8 inches) away…

15. External Equipment Setupp. 16

    IR Receiver This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable.

16. Tiling Displaysp. 17

    How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. Screws for…

17. REMOTE CONTROLp. 21

    The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install…

18. MAKING CONNECTIONSp. 23

    You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about

19. Connecting to a PCp. 23

    Some of the cables are not provided. This monitor supports the feature. * : a feature that enables a PC to recognize devices attached by the user without…

20. External Device Connectionp. 23

    s, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the feature. * : a feature that…

21. Using the Input Listp. 24
22. Daisy Chain Monitorsp. 25

    To use multiple products, first connect an external device to the product, connect one end of the supported signal input cable to the connector of the product…

23. TROUBLESHOOTINGp. 26

    No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the…

24. PRODUCT SPECIFICATIONSp. 29

    The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ”…