Bosch NIT5063UC installation instructions

Contents

1. 1 IMPORTANT SAFETY INSTRUCTIONSp. 3

   Read all instructions carefully before use. These precautions will reduce the risk of electrical shock, fire and injury to persons. When using kitchen…

2. 1.1 Safety definitionsp. 3

   Here you can find explanations of the safety signal words used in this manual. WARNING This indicates that death or serious injuries may occur as a result of…

3. 1.2 General informationp. 3

   Read this manual carefully. • Keep the instructions, the appliance pass and the product information safe for future reference or for the next owner. • Do not…

4. 1.3 General safety instructionsp. 3
5. 1.4 Appliance handling safetyp. 4

   WARNING Hidden surfaces may have sharp edges. •Use caution when reaching behind or under appliance

6. 1.5 Safety codes and standardsp. 4

   This appliance complies with the latest version of one or more of the following standards: • UL 858 - Household Electric Ranges • CAN/CSA-E60335-2-6, The…

7. 1.6 Electrical safetyp. 4

   Installer - show the owner the location of the circuit breaker or fuse. Mark it for easy reference. • If required by the National Electrical Code (or Canadian…

8. 1.7 State of California Proposition 65 Warningsp. 4

   This product may contain a chemical known to the State of California, which can cause cancer or reproductive harm. Therefore, the packaging of your product may…

9. 1.8 Restrictive Usep. 4

   This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and…

10. 2 Before you beginp. 5

    Before you begin Read these instructions before you begin to install your appliance. This Installation Instructions covers several models. All graphics are…

11. 2.1 Parts includedp. 5

    After unpacking all the parts, check for any damage in transit and for completeness of delivery

12. 2.2 Tools and parts neededp. 5

    Prepare these tools and accessories before you start to install your appliance. • Pencil • Measuring tape • Cross head screwdriver • Drill with bit 1/4" (6 mm)…

13. 2.3 Cabinet requirementsp. 5

    Ensure that the cabinetry at the installation location meets the requirements for a safe installation. • The distance from the top of the cooktop to the bottom…

14. 2.4 Countertop requirementsp. 5

    Ensure that the countertop into which the cooktop is to be installed meets these requirements for a safe installation. WARNING To reduce the risk of ignition…

15. 3 Prepare installation spacep. 6

    Prepare installation space Create the cutout in the countertop according to the instructions. General countertop requirements: • The angle of the cut surface…

16. 3.1 Cutout dimensions for 24" cooktopsp. 6

    Refer to these measurements for the models stated here. • NIT5460UC • NIT8461UC

17. 3.2 Cutout dimensions for 30" cooktopsp. 6
18. 3.3 Cutout dimensions for 36" cooktopsp. 7
19. 3.4 Cabinet ventilation requirementsp. 7

    To assure that the appliance works correctly, the cooktop MUST be sufficiently ventilated. The ventilation in the lower section of the appliance requires a…

20. 4 Installation procedurep. 8

    Installation procedure Follow these instructions to install the cooktop into the countertop. CAUTION Sharp edges. •Use protective gloves when installing the…

21. 4.1 Installing the heat shieldp. 8

    For safety reasons, the heat shield must be properly installed when closed cabinets are used. This prevents components from overheating as a result of the…

22. 4.2 Securing the cooktop to the countertopp. 8

    The cooktop must be secured from below using the holddown brackets provided, so it does not slip. 1. Place the cooktop face down on a soft underground.

23. 5 Electrical connectionp. 9

    Electrical connection Read these instructions to safely connect your appliance to the electrical supply

24. 5.1 Electrical requirementsp. 9

    Ensure that the following general requirements are met. • You can find the rating plate with the electrical specifications on the underside of the appliance. →…

25. 5.2 Connecting electrical supplyp. 10

    WARNING Before installing, turn power OFF at the service panel. •Lock service panel to prevent power from being turned ON accidentally. Note: If the cooktop is…

26. 6 Checking the installationp. 10

    Checking the installation Check if your unit is working properly after you have completed the installation steps. WARNING Before you turn on power supply, make…

27. 7 Removing the appliancep. 11

    Removing the appliance 1. Disconnect the appliance from the power supply. 2. NOTICE: Do not lever the appliance out from above at the frame. Push out the…

28. 8 Customer Servicep. 11

    Customer Service With any warranty repair, we will make sure your appliance is repaired by an authorized service provider using genuine replacement parts. We…

29. 8.1 Model number (E-Nr.) and production number (FD)p. 11

    You can find the model number (E-Nr.) and the production number (FD) on the appliance's rating plate. The model number (E-Nr.) can also be found on the glass…

30. 8.2 Rating plate locationp. 11

    You can find the rating plate of your appliance: • on the underside of the appliance • in the appliance pass • You can also check the Customer Service Index…

Other documents for this model

• Bosch HBL5351UC user manual
• Bosch Placa de inducción (NIT5063UC) user manual
• Bosch Induction cooktop (NIT5063UC) user manual
• Bosch Placa de inducción (NIT5663UC) user manual
• Bosch Induction cooktop (NIT5663UC) user manual
• Bosch Induction cooktop (NIT8061UC) user manual
• Bosch Placa de inducción (NIT8061UC) user manual
• Bosch Placa de inducción (NIT8461UC) user manual
• Bosch Induction cooktop (NIT8461UC) user manual
• Bosch Induction cooktop (NIT8661UC) user manual