Loading manual…
Philips BT55B/00 user manual
Open PDFOpens the file on objects.icecat.biz.
Contents
- 1 Importantp. 3
Only use attachments/accessories specified by the manufacturer. • The battery shall not be exposed to excessive heat such as sunshine, fire or the like. • Do…
- 2 Noticep. 3
Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment
- Compliancep. 3
Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.…
- Care of the environmentp. 3
Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and…
- Trademark noticep. 4
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under…
- 3 Your Bluetooth speakerp. 4
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/…
- Introductionp. 4
With this speaker, you can enjoy audio from Bluetooth-enabled devices
- What's in the boxp. 4
Check and identify the contents of your package: • Speaker • USB cable for charging • Printed materials
- Overview of the speakerp. 5
a LED indicator • Indicate the battery or Bluetooth connection status. b Micro USB socket • Charge the speaker. c Reset hole • Reset the speaker. d / • Turn…
- 4 Get startedp. 5
Always follow the instructions in this chapter in sequence
- Turn on/offp. 5
To turn the speaker on, press and hold / for two seconds. » » The LED indicator starts flashing. » » The speaker beeps. • To turn the speaker off, press and…
- Charge the built-in batteryp. 5
Note • It takes you approximately two hours to fully charge the battery. • The micro USB socket is for charging only. • Rechargeable battery has a limited…
- 5 Play from Bluetooth devicesp. 6
Connect a Bluetooth device Note • Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth…
- Connect a Bluetooth devicep. 6
Note • Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices. • Any obstacle between…
- Play from a connected Bluetooth devicep. 7
Note • Music play pauses when there is an incoming call, and resumes when your phone call ends. After successful Bluetooth connection, play audio on the…
- Disconnect a devicep. 7
Turn off the speaker; • Turn off the speaker, then press and hold / until the speaker beeps twice to enter pairing mode; • Disable Bluetooth on your device; or…
- Reconnect a devicep. 7
When you turn on the speaker, it tries to reconnect the last connected device automatically; • If not successful, select [Philips BT55] on your Bluetooth menu…
- 6 Specificationsp. 8
Note • Product information is subject to change without prior notice. • Rated Output Power (Amplifier): 2W RMS • Acoustic Frequency Response: 60-20000 Hz •…
- 7 Troubleshootingp. 8
- Generalp. 8
No power • Recharge the speaker. No sound • Adjust volume on the connected device. • Make sure that your Bluetooth device is within the effective operational…
- About Bluetooth devicep. 8
The audio quality is poor after connection with a Bluetooth-enabled device. • The Bluetooth reception is poor. Move the device closer to this product or remove…