Loading manual…
Loading manual…
Dear Customer Thank you for purchasing our Pocket Projector. We hope you enjoy your device and its many functions! About this User Manual With the installation…
Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from…
Top of the Device 1 – Touchpad for navigation and operation of the mouse pointer (see also Touchpad / Gestures, page 7) 2 – LED status bar Blue: device…
Setting up the Device You can position the device so that it lies flat on a table in front of the projection surface; it is not necessary to tilt it towards…
Inserting a Memory Card VGA Y-Pb-Pr HDMI 1 Insert a memory card with the contacts facing upwards into the / slot at the back of the device. Your device…
In a wireless network (Wireless Local Area Network, WLAN) at least two computers, printers or other addi tional devices communicate with each other over radio…
Navigation Keys All the keys shown are buttons on the remote control. Best Settings for Optimal Use Read the informations on the best settings in the chapter…
Necessary Accessories To be able to use the DVB-T function of your projector, you either require the Pico Station PPA7301 (not supplied) or the USB DVB-T stick…
Your Pocket Projector uses the Android operating sys tem. Calling Android 1 Switch the device on using the on/off switch on the side. 2 After the initial…
Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Settings. 4…
Care Instructions for the Battery The capacity of the battery diminishes with time. You can prolong the life of the battery if you observe the fol lowing…