Loading manual…
Sharp PN-L652B (PNL652B) user manual
- Type
- User manual
- Language
- English
- Pages
- 67
- Category
- Commercial displays
- Models
- PANEL1PANEL2PNL752BPNL862BZCMS1
Open PDFOpens the file on objects.icecat.biz.
Contents
- IMPORTANT INFORMATIONp. 3
- DEAR SHARP CUSTOMERp. 4
- SAFETY PRECAUTIONSp. 4
carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and…
- TIPS AND SAFETY INSTRUCTIONSp. 6
- MOUNTING PRECAUTIONSp. 7
This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before…
- Supplied Componentsp. 9
If any component should be missing, please contact your dealer. Liquid Crystal Display Monitor: 1 Remote control unit: 1 Cable clamp: 4 Power cord …
- System Requirementsp. 9
- Part Namesp. 10
1. POWER button / Power LED (See page 18.) 2. Remote control sensor (See page 15.) 3. USB port (USB 3.0 compliant) (See page 13.) 4. Speakers 5. Infrared…
- Connecting Peripheral Equipmentp. 12
Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the…
- Connecting the Power Cordp. 14
Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal.…
- Binding Cablesp. 14
The supplied cable clamps can be used to clamp the power cord and cables connected to the back of the monitor. Attach the supplied cable clamps to a flat…
- Preparing the Remote Control Unitp. 15
Remote control operation range The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/…
- Mounting a web camerap. 16
2 3 Camera mount It is possible to mount the PN-ZCMS1 Video-Conferencing Soundbar (optional) or a commercially available web camera. 1. Remove the screws from…
- Attaching the wireless adapterp. 17
2 Wireless adapter * 1. Remove the bottom cover. 2. Attach a wireless adapter. Take note of the direction of the wireless adapter. The surface with the * mark…
- Turning Power On/Offp. 18
Turning power on 1. Press the POWER button. POWER button / Power LED Status Status of the monitor Blue lit Power on Sleep state (Backlight off) Orange lit…
- Touch Penp. 20
Pen tip (thin) Pen tip (thick) The following pre-installed software recognizes the side of the touch pen that is touching the screen, enabling the two sides to…
- Touch actionp. 21
s that can be used with this monitor differ according to operating system and application. The functions of touch actions are also different. For details…
- Basic Operationp. 22
About the home screen of APPLICATION mode This screen appears when the input mode is changed to APPLICATION. (3) (6) (5) (4) (1) (2) (2) (2) (1) Start…
- Whiteboardp. 29
You can write letters or draw lines on the screen as a whiteboard. • You can print or save content written on the screen. • You can display an image or PDF…
- Screen share (Bytello Share)p. 35
You can display the image of another device on the same network on this monitor. • Connections to all devices is not guaranteed. • If the display is delayed…
- PDF Viewerp. 37
Starts when a PDF file is opened on an application such as “File Explorer”, etc. (1) (3) (2) (1) Displays the PDF. Zoom-in or zoom-out the display by…
- Printingp. 37
(See below.) (2) Close / display the bookmark. (3) Exit the application. Printing You can print with SHARP MFP that supports the Sharp Print Service Plugin on…
- File Explorerp. 38
Manages the files and folders in the internal storage and the USB flash drive connected to the monitor. You can also display or play back the files. 1. On the…
- Web Browserp. 40
1. On the home screen of APPLICATION mode, touch “Web Browser”. Exiting Close the Web Browser from the recent app bar. TIPS • Please use the “File Explorer”…
- Updating the Software (Update)p. 41
- Common Settings Menup. 42
Displaying the menu screen Adjusts the images and sound. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may…
- Administrator Settings Menup. 45
Displaying the menu screen Makes settings for this monitor. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so…
- Reset/Functional Restriction Setting (FUNCTION Menu)p. 51
You can reset the settings to the factory default settings or restrict operations. When you use FUNCTION menu, a password is required. (Factory setting) (See…
- Controlling the Monitor with a computer (RS-232C)p. 52
You can control this monitor from a computer via RS-232C (COM port) on the computer. This is the description when “Command Format” is set to “S-Format”. (See…
- Controlling the Monitor with a computer (LAN)p. 56
Command-based control You can control the monitor using RS-232C commands (see page 55) via terminal software and other appropriate applications. Read the…