Samsung VG-LFR13SWL installation instructions

Contents

1. LED Display Installation Manual Ver. 4.2 IER / IER-F / IFR /IFR-F Series LH0**IER*LS , LH0**IER*FS LH0**IFR*LS , LH0**IFp. 1
2. Revision Historyp. 2

   Version Date (Y/M/D) Description 2.0 2020/03/20 New Release 3.2 2020/06/22 Add SNOW-1810U installation and picture setting 3.3 2020/08/07 Add test pattern…

3. Dehumidification guidance – during installationp. 3

   When moist gets into LED package because of high humidity, ‘Line defect’ can be caused by electrical short inside of LED Package. For keeping the best…

4. Dehumidification guidance – during operationp. 6

   This information should be noticed to customer. Please print this page and hand it to user.

5. 슬라이드 번호 7p. 7

   Dew condensation due to overcooling Even though meet with Samsung recommended operation condition, dew condensation is possible to happen when surface of…

6. 슬라이드 번호 8p. 8

   Prevent condensation due to A/C Make sure that the cold air does not blow directly on the screen. – When the cold air from A/C (air conditioner) blows…

7. Guidance of latest firmwarep. 9

   Cabinet : Main - L-xxxMWWAC-nnnn.n xxx = Pan name, nnnn.n = version FPGA - aabbd_ddddd aa = pixel pitch, bb = LED package type, d_ddddd= version Example …

8. 1. Product Information and Installation Precautionsp. 11

   ◆Model Line-up - This Manual is an Installation Manual for IER/IFR(Appendix. IER-F/IFR-F), which contains information of models below (Installation process is…

9. 2. Preparation for Cabinet Installationp. 25

   ①Remove the tape on top of the package box and open the box. (See Fig.1.) ②Remove the Top–Cushion and open the shielding bag. Hold the handles inside, take out…

10. 3. Frame kit Componentsp. 29
11. 4. Frame Installationp. 30

    ②On the left end, place the ⓐBracket Side and fasten the screws to install the Bracket (Fig.3). ※ Fasten one screw first, and use a clinometer to vertically…