Loading manual…
Loading manual…
If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. • Image shown may differ from…
items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain…
Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • It is…
(Depending on model) 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm…
Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you…
Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to…
You can simply operate the TV functions, using the button. Basic functions Power On (Press) Power Off1) (Press and Hold) Menu Control (Press2)) Menu Selection…
(Depending on model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ • When adjusting the angle of the…
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace…
The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s equipment with LGE software. If…
To obtain the source code under GPL, LGPL, MPL, and other open source
SuperSign Software & Manual -- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model
, that is contained in this product, please visit https:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers…
RS-232C Setup (Depending on model) • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a…