Sharp ME552 (L50ME552) user manual

Contents

1. DEAR CUSTOMERp. 2
2. Important Informationp. 3

   To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB port, USB Type C port and Audio output terminal.…

3. Supplied Componentsp. 13

   If any component should be missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Remote control unit battery: 2 …

4. Part Namesp. 14

   nFront View 2 3 1 1 Remote Control Sensor (See page 19) 2 Ambient light sensor (See page 57) 3 Power Indicator (See page 20) TIP:
   • Ambient light sensor…

5. Connecting Peripheral Equipmentp. 16
6. Connecting the Supplied Power Cordp. 18

   - 98 N•cm NOTE:
   • Please make sure that enough power is supplied to the monitor. Please refer to the “Power Supply” in the specification (See “Product…

7. Mounting (for Customer)p. 18

   Please contact your supplier as they may be able to provide a list of qualified installation professionals. Mounting on a wall or ceiling and hiring a…

8. Preparing the Remote Controlp. 19

   nInstall the remote control batteries The remote control is powered by two 1.5 V AAA batteries. To install or replace batteries: 1 2 3 NOTE:
   • If you do not…

9. Turning Power On/Offp. 20

   The Main Power switch must be in the ON position in order to power up the monitor using the POWER ON button on the remote control or the POWER button on the…

10. Basic Operationp. 22
11. Menu Screenp. 25

    About the home screen This screen appears when the HOME button on the remote control is pressed. 4 5 3 2 1 1 Changes the input mode. Input mode Video Audio…

12. Application - File Explorerp. 27

    Manages the files and folders in the internal storage and the USB flash drive connected to the monitor. On the home screen, select [File Explorer] and press…

13. Application - Web Browserp. 29

    1. On the home screen, select [Web Browser] and press the SET button on the remote control. Exiting Press the EXIT button on the remote control to close the…

14. Application - Updaterp. 30
15. Application - MediaPlayerp. 31
16. Advanced Operationp. 36

    Creating a Power and Reboot Schedule The schedule function allows the monitor to automatically change between power on and standby state at different times and…

17. External Controlp. 43

    Connecting an external device There are two options to connect an external device to control the monitor. • RS-232C terminal. Connecting an external device to…

18. Troubleshootingp. 48

    Screen Image and Video Signal Issues No picture • The signal cable should be completely connected to the display card/computer. • The display card should be…

19. Specificationsp. 51

    Compatible signal list Signal name Resolution Scanning frequency HDMI USB-C Remarks Horizontal Vertical MODE1 MODE2 VGA 640 x 480 31.5 kHz 60 Hz Yes Yes Yes…

20. Appendix-A External Resourcesp. 54

    Additional specification documents and accessories, and optional software applications referenced in this product manual are listed below. nRegional websites…

21. Appendix-B Common Settings Menu Listp. 56

    Default values can be provided on request. Picture Picture Picture mode Provides pre-configured picture settings suitable for various environments where this…

22. Appendix-C Administrator Settings Menu Listp. 59

    Input & Output Input & Output Input Change Startup App Sets which application to automatically start. Auto Input Change When enabled, this option can detect…

23. Mounting Precautions (For SHARP dealers and service engineers)p. 69

    Please read “Important Information” carefully before installation. Mounting the monitor requires expertise and the work must be carefully performed by a…

24. Manufacturer’s Recycling and Energy Informationp. 74

    We are strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the…