Loading manual…
Philips QC5053 user manual
Open PDFOpens the file on documents.philips.com.
Contents
- Introductionp. 6
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.…
- General description (Fig. 1)p. 6
A Small comb B Main cutting element C On/off slide D Length indicator E Length lock (locks the hair length setting) F Cleaning brush G Adapter H Appliance plug…
- Importantp. 6
Read this user manual carefully before you use the appliance and save it for future reference. Danger -- Keep the appliance and the adapter dry (Fig. 2).…
- Dangerp. 6
Keep the appliance and the adapter dry (Fig. 2). Warning -- Check if the voltage indicated on the appliance corresponds to the local mains voltage before you…
- Warningp. 6
Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. -- The adapter contains a transformer.…
- Cautionp. 7
Only use the adapter supplied. -- Do not use a damaged adapter. -- Use, charge and store the appliance at a temperature between 15°C and 35°C. -- If the…
- Electromagnetic fields (EMF)p. 7
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user…
- Charging (QC5050 only)p. 7
Charge the appliance for 8 hours (NiCd battery) or 12 hours (NiMh battery) before you start to use it for the first time. A fully charged appliance has a…
- Optimising the lifetime of the batteryp. 8
After the appliance has been charged for the first time, do not recharge it between clipping sessions. Continue to use it and recharge it only when the battery…
- Corded clippingp. 8
QC5050 only: Do not run the appliance from the mains when the battery is fully charged. ,, To use the hair clipper connected to the mains: switch the hair…
- QC5050 only:p. 8
Do not run the appliance from the mains when the battery is fully charged. ,, To use the hair clipper connected to the mains: switch the hair clipper off…
- QC5010 only:p. 8
1 Insert the appliance plug into the appliance. (Fig. 3) 2 Insert the adapter into the wall socket. Using the appliance Clipping with comb attachment -- The…
- Using the appliancep. 8
Clipping with comb attachment -- The hair length after cutting is indicated in millimetres on the display. The settings correspond to the remaining hair length…
- Clipping with comb attachmentp. 8
The hair length after cutting is indicated in millimetres on the display. The settings correspond to the remaining hair length after cutting. -- The hair…
- Clipping without comb attachment:p. 9
You can use the clipper without comb attachment to contour the neckline and the area around the ears. -- Remove the comb attachment by pulling it off the…
- Cleaningp. 9
Clean the appliance every time you have used it. Do not use abrasives, scourers or liquids such as alcohol, petrol or acetone to clean the appliance. The…
- Replacementp. 10
A worn or damaged cutting unit should only be replaced with an original Philips cutting unit. 1 Push the middle part of the cutting unit upwards with your…
- Environment (QC5050 only)p. 10
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing…
- Guarantee & servicep. 11
If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in…