Sharp EA241WU (60004677) user manual

Contents

1. CAUTIONp. 3
2. WARNINGp. 3
3. Registration Informationp. 4

   Cable information CAUTION: Use the attached specified cables with this monitor so as not to interfere with radio and television reception. For DVI and mini…

4. Recommended usep. 5
5. Safety Precautions and Maintenancep. 5
6. Ergonomicsp. 6

   To realize the maximum ergonomics benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid…

7. Cleaning the LCD Panelp. 6

   When the LCD is dusty, please gently wipe with a soft cloth. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning…

8. Cleaning the Cabinetp. 6

   Unplug the power supply • Gently wipe the cabinet with a soft cloth • To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the…

9. Parts Name and Functionsp. 7

   Control Panel LED Power Key Control buttons Refer to the Controls section. See page 13. A AC IN Connector Connects with the supplied power cord. B DisplayPort…

10. Quick Startp. 8

    For box contents, please refer the printed contents sheet provided in the box. To attach the base to the LCD monitor stand: 1. Place the monitor face down on a…

11. ControlSyncp. 13

    simultaneously controls all sub monitors connected to a master monitor. It can also individually control a single sub monitor using the INDIVIDUAL ADJUST…

12. Controlsp. 15

    OSD (On-Screen Display) control keys on the front of the monitor function as follows: 1 Ambient Light Sensor Human Sensor Detects the level of ambient lighting…

13. Specificationsp. 23

    Monitor Specifications MultiSync EA241WU Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 61.13 cm/24.1 inches 61.13 cm/24.1…

14. Featuresp. 25

    3-side Narrow Bezel: Stylish appearance and less distance between adjacent screens in a multi-monitor setup. Fully Ergonomic Stand: Provides viewing…

15. Troubleshootingp. 26

    No picture • Make sure the signal cable is fully connected to both the monitor and the computer. • Make sure the computer’s display card is fully seated in its…

16. Human sensing functionp. 28

    The Human Sensing function reduces power consumption by detecting the movement of a person. The HUMAN SENSING has following two settings: MODE HUMAN SENSING…

17. Using the Auto Brightness functionp. 29

    The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the…

18. Manufacturer’s Recycling and Energy Informationp. 30

    NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the…