Loading manual…
Loading manual…
Read this user manual carefully before you use the appliance and save it for future reference. This appliance is not intended for use by persons (including…
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user…
Put the appliance plug in the shaver. 2 Put the powerplug in the wall socket
Switch the shaver on by pressing the on/off button once. The green light ring round the on/off button goes on to indicate that the motor is running. - -…
For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide downwards. The trimmer can be activated while the motor is running. 2 Close the…
’). 5 Put the protection cap on the shaver every time you have used it, to prevent damage. Trimming For grooming sideburns and moustache. 1 Open the trimmer by…
Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the shaving…
Open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). 2 Clean the cutters and guards with the brush supplied. Do not clean…
Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the…
Put the protection cap on the shaver to prevent damage. The appliance can be stored in the pouch supplied
Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ9 Philips shaving heads only. Note: Do not…
The following accessories are available: HQ8500/HQ8000 powerplug. HQ9 Philips Shaving Heads. HQ110 Philips Shaving Head Cleaning Spray
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing…
Reduced shaving performance. Cause 1: the shaving heads are dirty.The shaver has not been rinsed long enough or the water used was not hot enough. Clean the…