Philips QT4045 user manual

Contents

1. Introductionp. 6

   Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.…

2. General description (Fig. 1)p. 6

   A Comb attachment B Detachable cutting unit C Flexible hair guide D Hair-collection chamber & filter E Adjustment ring (Precision Zoom Lock `) F On/off slide G…

3. Importantp. 6

   Read this user manual carefully before you use the appliance and save it for future reference

4. Dangerp. 6

   Make sure the adapter does not get wet. - English

5. Warningp. 7

   Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. The adapter contains a transformer. Do…

6. Cautionp. 7

   Charge, use and store the appliance at a temperature between 15°C and 35°C. Do not charge the appliance in a pouch or cassette. Do not immerse the appliance in…

7. Electromagnetic fields (EMF)p. 7

   This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user…

8. Chargingp. 8

   Charge the appliance for at least 10 hours before you use it for the first time and after a long period of disuse. Do not charge the appliance for more than 24…

9. Preparing for usep. 8

   Always comb your beard or moustache with a fine comb before you start trimming

10. Using the appliancep. 8

    Absorbing cut hairs The suction system is activated automatically as soon as you switch on the appliance. It absorbs cut hairs during every kind of use, i.e.…

11. Absorbing cut hairsp. 8

    The suction system is activated automatically as soon as you switch on the appliance. It absorbs cut hairs during every kind of use, i.e. trimming with and…

12. Trimming with comb attachmentp. 9

    Turn the adjustment ring (Precision Zoom Lock `) to the desired hair length setting (see table). (Fig. 3) The setting appears in the window below the…

13. Trimming without comb attachmentp. 10

    Use the trimmer without comb attachment to trim full beards and single hairs. 1 Remove the comb attachment (Fig. 7). Note: Never pull at the flexible top of…

14. Cleaningp. 10

    ’). Trimming at the unique ‘stubble look’ setting Use the trimmer with the comb attachment set to hair length setting 1. This allows you to create a ‘stubble…

15. Hair-collection chamberp. 10

    Switch off the appliance. 2 Remove the hair-collection chamber (Fig. 8). 3 Shake the hairs out of the hair-collection chamber or remove them with the cleaning…

16. Appliancep. 11

    Remove the comb attachment (Fig. 7). 2 Remove the cutting unit (Fig. 10). 3 Clean the cutting unit and the inside of the appliance with the brush supplied.…

17. Replacementp. 11

    Always replace a damaged cutting unit or filter with an original Philips cutting unit or filter, available at your dealer or at authorised Philips service…

18. Environmentp. 11

    Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing…

19. Removing the batteryp. 11

    , you can also take the appliance to a Philips service centre. The staff of this centre will remove the battery for you and will dispose of it in an…

20. Guarantee & servicep. 12

    If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in…

21. Troubleshootingp. 12

    This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below…