Loading manual…
Loading manual…
en WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. Only use the manufacturer's original spare parts…
Modified or damaged water hoses may result in material damage and damage to the appliance. Never kink, crush, modify or cut through water hoses. Only use the…
Installation and connection 4.1 Unpacking the appliance ATTENTION Objects remaining in the drum that are not designed for operation with the appliance may…
en 3. Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight. In doing so, hold the foot tight and do not adjust its…
Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. 1 2 4 6 3 5 7 7 On certain models…
en the information in the programme descriptions. 2 3 1 4 Measuring aid for liquid detergent Page 26 Compartment II: Detergent for the main wash Compartment …
en Display Description Flashes: Drum cleaning is required. Run the Drum Clean programme for cleaning and caring for the drum and the outer tub. Page 29 Lights…
Button Description The operating signals and the information signals are deactivated and the appliance is adjusted for quiet operation, e.g. by reduced drum…
Programme Description Max. load (kg) If you wish to reduce the programme duration to 15 minutes, activate Speed Perfect. The maximum load is reduced to 2,0 kg.…
Laundry 11.1 Preparing the laundry ATTENTION Objects remaining in the laundry may damage the laundry and the drum. Remove all items from any pockets in your…
en Remove curtain fittings and lead strips Wash small or particularly delicate items in a mesh washing bag Wash large and small items of laundry together Wash…
Basic operation 13.1 Switching on the appliance Requirement: The appliance has been correctly installed and connected. Page 10 Turn the programme selector to a…
2. Open the door. Page 26 The appliance door remains locked for safety reasons if the temperature and water levels are high. – If the temperature is high…
Basic settings You can configure the basic settings for your appliance to meet your needs. 28
en 15.1 Overview of the basic settings 1 2 3 4 5 Programme selector with programme positions No basic setting. Set the volume of the signal at the end of the…
en 5. Screw the pump cap as far as it will go. The handle on the pump cap must be in a vertical position. 6. Insert and close the maintenance flap. Before the…
en Pull the emergency unlock downwards with a tool and release. The door lock is released. 2. Insert the maintenance flap and lock it into place. 3. Close the…
1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally friendly manner. Information about…
Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60…
en ive only and were determined in accordance with the applicable standard EN60456. Programme Load (kg) Programm e duration (h:min) 1 Energy consumption (kWh/…