LG STB-6500 installation instructions

Contents

1. First Use Wizardp. 4

   * Images shown may differ from your STB

2. Screen Resolutionp. 4

   The first time you turn ON the STB/display panel, a prompt to select the screen resolution will be displayed, and you will need to select the appropriate…

3. Basic Settingsp. 5

   , Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by Start button. Basic Settings (Depending on model) This menu is for…

4. Data Cloningp. 9

   (Depending on model) Access Data cloning menu of STB Manager application for applying cloning file

5. Solution Settingsp. 9

   (Depending on model) The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and…

6. Installation Menu Settingsp. 18

   (Depending on model) Access Installation menu for commercial feature settings.

7. Installation Menup. 19
8. Introductionp. 19

   The abundant functions for Hotel STB linked with software installation can be projected on OSD as ‘Installation Menu’.  The wide range of hotel features can…

9. LG Hotel Mode Setupp. 20

   When ‘LG Hotel Mode Setup’ is set to On, all functions of Hotel Mode apply. Power On Status • Decide to select working status of STB Set when turn on main…

10. Networkp. 24

    (Depending on model) MAC Address • Displays the MAC address (not customizable). Network Settings One-click network connection • Connects easily to a network. •…

11. Pro:Centricp. 26

    (Depending on model) Mode • Sets whether or not enable Pro:Centric and the service method. • You can set to Off, Configuration Only, GEM or HTML. The default…

12. Generalp. 28

    Configuration Setup Select RCU • It is a mode to set whether to use Select RCU or not. When set to ‘Enable’, You can adjust ‘Number of RCU’ menu. Number of RCU…

13. Portal Settingsp. 37

    (Depending on model) Portal Mode (Depending on model) • You can select 'Default Portal' (Use webOS default portal), 'Customizable Portal' (Use editable…

14. Media Sharep. 42

    (Depending on model) Smart Share (Depending on model) • Smart Share enables DLNA function. If this value is enabled, STB acts as Media Player and displays…

15. Displayp. 45

    Resolution • You can set the STB resolution. Display On Time Setup • STB will send command set to display monitor after delay time(seconds) which is set in…

16. STB Managerp. 46

    * Images shown may differ from your STB. You can update files from USB to STB through the STB manager. Diagnostics (Depending on model) • Sets Enable or…

17. IR Codesp. 56

    This feature is not available for all models. Code (Hexa) Function Note 08 (POWER) Remote control Button (Power On/Off) 95 Remote control Button AF Remote…

18. External control device Setupp. 57

    RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s…

19. RS-232C Setupp. 57

    Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions…

20. Phone jack Typep. 57

    (Depending on model) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the STB, which is specified in the…

21. Type of Connector : D-Sub 9-Pin Malep. 57
22. RS-232C Configurationsp. 58
23. Communication Parametersp. 58

    Baud rate: 9,600 bps (UART) • Data length: 8 bits • Parity : None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable

24. IR OUT Using Guidep. 58

    Suitable / Not Recommend remote-controller data format Item Formats Suitable data format NEC, RC5, Toshiba Not recommend data format Continuous data format…

25. Command Reference Listp. 59

    (Depending on model) Command1 Command2 Data (Hexadecimal) 01. Power k a 00 to 01 02. Aspect Ratio k c (See p. 60) 03. Screen Mute k d (See p. 61) 04. Volume…

26. Transmission / Receiving Protocolp. 60

    (Depending on Model) Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command1] : First command to control the STB. (j, k, m or x) [Command2] …