Canon LX-MU500 (1033C003) user manual

Contents

1. Safety instructionsp. 3

   Before installing and operating the projector, read this manual thoroughly. This projector provides many convenient features and functions. Operating the…

2. Projector exterior viewp. 16

   1. External control panel (See "Projector" on page 17 for details.) 2. Lamp cover 3. Vent (heated air exhaust) 4. Speaker 5. Adjuster foot 6. Projection lens…

3. Controls and functionsp. 17

   Projector 13. AUTO PC Automatically determines the best picture timings for the displayed image. See "Autoadjusting the image" on page 38 for details. 14.…

4. Positioning your projectorp. 21

   Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position…

5. Connectionp. 26

   When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for…

6. Operationp. 33

   Starting up the projector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that the POWER…

7. Adjusting the projected imagep. 38

   Adjusting the projection angle The projector is equipped with 2 adjuster feet. These adjusters change the image height and projection angle. To adjust the…

8. Useful functions available during a presentationp. 42

   Selecting a image mode The projector is preset with several predefined image modes so that you can choose one to suit your operating environment and input…

9. Watching 3D contentp. 49

   This projector supports 3D content display using the DLP Link system. This projector supports 3D image signals in Frame Sequential/Frame…

10. Supervising and controlling by computerp. 51

    With a proper LAN cable connection and LAN Control settings, you can operate the projector from a computer using a web browser or PJLink™ application when the…

11. Menu operationp. 57

    Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. * Indicates an item that is factory-set. Main menu…

12. Maintenancep. 64

    Care of the projector Your projector needs maintenance from time to time, depending on the environmental circumstances, and should be done by authorized…

13. Lamp informationp. 66

    Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The…

14. Indicatorsp. 71

    Light Status & Description POWER TEMP LAMP Power events Orange Off Off Stand-by mode. Green Flashing Off Off Powering up. Green Off Off Normal operation.…

15. Troubleshootingp. 72

    The projector does not turn on No picture Blurred image Remote control does not work The password is incorrect The LAN function cannot be used Cause Remedy…

16. Specificationsp. 73

    Projector specifications All specifications are subject to change without notice. Model name LX-MW500 LX-MU500 Display system 1-CHIP DLP™ Optical system Time…