Loading manual…
Loading manual…
Safety Precautions Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does…
TV controls Sensors and indicators 1. Standby indicator LED and remote control sensor The standby LED indicates when your TV is in standby. Point the remote…
View Text Select a page While you watch channels that broadcast text, you can view the text. 1. Select a channel that broadcasts text, then press TEXT. 2.…
Picture and sound Picture settings You can change the settings in the Picture menu. 1. Press . 2. Select [Setup] > [TV settings] > [Picture], then press OK. 3.…
About cables Cable quality Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest…
General issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power…
Power and reception Product specifications are subject to change without notice. Power Mains power: AC 220-240 V (50-60 Hz) Standby power consumption: <…
A amplifier, select output - 35 analogue channels, fine-tune - 21 analogue channels, install - 21 analogue channels, subtitles - 23 audio language - 23 Auto…