Sharp EA271Q (60004303) user manual

Contents

1. WARNINGp. 3
2. CAUTIONp. 3
3. Registration Informationp. 4

   Cable information CAUTION: Use the attached specified cables with this monitor so as not to interfere with radio and television reception. For DVI, please use…

4. Recommended usep. 5
5. Safety Precautions and Maintenancep. 5
6. Ergonomicsp. 6

   To realize the maximum ergonomics benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid…

7. Cleaning the LCD Panelp. 6

   When the LCD is dusty, please gently wipe with a soft cloth. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning…

8. Cleaning the Cabinetp. 6

   Unplug the power supply • Gently wipe the cabinet with a soft cloth • To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the…

9. Parts Name and Functionsp. 7

   Control Panel LED Power Key Control buttons Refer to the Controls section. See page 14. A AC IN Connector Connects with the supplied power cord. B DVI IN DVI…

10. Quick Startp. 8

    For box contents, please refer to the printed contents sheet provided in the box. To attach the base to the LCD monitor stand: 1. Place the monitor face down…

11. ControlSyncp. 13

    simultaneously controls all sub monitors connected to a master monitor. It can also individually control a single sub monitor using the INDIVIDUAL ADJUST…

12. Multiple monitors connection using DisplayPortp. 15

    You can daisy-chain monitors to each other using the DisplayPort OUT/IN connections on the monitors. For using connected monitors in MST (multi-stream…

13. Controlsp. 16

    OSD (On-Screen Display) control keys on the front of the monitor function as follows: 1 Ambient Light Sensor Human Sensor Detects the level of ambient lighting…

14. Using the PICTURE MODE functionp. 26

    Choose the Picture Mode that is most suitable for the type of content that is shown. There are several Picture Mode types (FULL, sRGB, Low Blue Light, DICOM…

15. Specificationsp. 27

    Monitor Specifications MultiSync EA271Q Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 68.47 cm/27 inches 68.47 cm/27 inches…

16. Featuresp. 29

    USB Type-C With Power Delivery: Supports video & audio input, USB hub function and supplies power to connected devices by a single cable, which provides…

17. Troubleshootingp. 30

    No picture • Make sure the signal cable is fully connected to both the monitor and the computer. • Make sure the computer’s display card is fully seated in its…

18. Human sensing functionp. 32

    The Human sensing function reduces power consumption by detecting the movement of a person. The HUMAN SENSING has following two settings: MODE HUMAN SENSING…

19. Multi Display settingp. 33

    [Example of V MONITOR 3, H MONITOR 3 (See page 22)] 1. Touch the MENU/EXIT key to display the OSD menu. 2. Touch the LEFT/RIGHT key to select MULTI DISPLAY. 3.…

20. Using the Auto Brightness functionp. 35

    The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the…

21. Using the MULTI PICTURE functionp. 36

    This monitor can display split screens from two sources by using any one of the input combinations shown on page 18. NOTE: Please see MULTI PICTURE (page 18)…

22. Using the Zoom functionp. 37

    Allows you to use the entire screen area, significantly expanding the size. Allows the picture displayed in the center to expand. NOTE: When LEFT or RIGHT is…

23. Manufacturer’s Recycling and Energy Informationp. 39

    NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the…