Epson EB-805F (V11H923640) installation instructions

Contents

1. About This Installation Guidep. 2

   Contents of this Guide This guide contains the following information. • Installing an ultra-short throw projector (EB-805F/EB-800F) using the wall mount…

2. Introductionp. 5

   Using the Product Safely For your safety, read all the instructions in this guide before using this product. Incorrect handling that ignores instructions in…

3. Using the Product Safelyp. 5

   For your safety, read all the instructions in this guide before using this product. Incorrect handling that ignores instructions in this guide could damage…

4. Figures of Installation Dimensionsp. 10

   100mm 500mm 500mm Caution When installing the projector, make sure there is a gap between the wall and the projector's air exhaust and intake vents. (See…

5. Connection Figurep. 11

   Connecting the Control Pad You need the following cables when using the Control Pad. Prepare a commercially available LAN cable and USB cable to connect the…

6. Installing the Wall Mountp. 13

   Cautions on Installing the Wall Mount Warning The Wall mount is exclusively for mounting the projector on a wall. If anything other than a projector is…

7. Cautions on Installing the Wall Mountp. 13

   Warning The Wall mount is exclusively for mounting the projector on a wall. If anything other than a projector is mounted, the weight may result in damage. If…

8. Cautions on the Installation Location of the Wall Mountp. 17

   Warning Do not install in a location subject to oily smoke or smoke for events. If oils and so on stick to the slide plate fixing part of the projector, the…

9. Wall Mount Specificationsp. 19

   Item Specification Wall mount mass (setting plate, hexagonal axis, adjustment unit, wall plate, wall plate cover, end cap) Approx. 9.2 kg Maximum load capacity…

10. Installation Procedure for the Wall Mountp. 25

    Follow the work flow below to install the wall mount. Route the cables before installing the wall mount according to your installation environment. a Check the…

11. Installing the Control Padp. 69

    Notes on the Control Pad Warning Only connect to the EB-805F/EB-800F. Do not connect it to any other projectors or devices. Doing so may damage the device.…

12. Notes on the Control Padp. 69

    Warning Only connect to the EB-805F/EB-800F. Do not connect it to any other projectors or devices. Doing so may damage the device. Route the cables so that…

13. Control Pad Specificationsp. 73

    Item Specification Control pad mass Approx. 0.6kg Power (AC adapter) 100 to 240 V AC +/- 10%, 50/60 Hz Power 12 VDC 2.5 A 30 W Electricity consumption during…

14. Installing the Control Padp. 75

    Installing the Control Pad Installing the Control Pad a Place your finger in the hole at the top and remove the front cover. b Connect the power cable and…

15. Setting the Projectorp. 79

    Batch Setup Function After making the projector's menu settings for one projector, you can copy the settings to other projectors (batch setup function). The…

16. Batch Setup Functionp. 79

    After making the projector's menu settings for one projector, you can copy the settings to other projectors (batch setup function). The batch setup function is…

17. Installing Multiple Projectors (Multi-Projection)p. 85

    Setting the Projector 84 Installing Multiple Projectors (Multi- Projection) You can create one horizontally long screen as a unified image projected from…

18. Appendixp. 91

    List of Safety Symbols The following table lists the meaning of the safety symbols labeled on the equipment. Symbol mark Approved standards Meaning IEC60417…

19. List of Safety Symbolsp. 91

    The following table lists the meaning of the safety symbols labeled on the equipment. Symbol mark Approved standards Meaning IEC60417 No.5007 Power On To…

20. General Noticep. 94

    Mac and OS X are trademarks of Apple Inc. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or…