Loading manual…
Loading manual…
READ ALL INSTRUCTIONS BEFORE USING. SAFETY PRECAUTIONS I Check and comply with your state and local codes. You must follow these guidelines. I Use care when…
will void the product warranty, and the installer will be responsible for any service, repair or damages caused thereby. IMPORTANT INSTALLATION RECOMMENDATIONS…
INSTALL BYPASS VALVE • Remove plastic shipping plug and wire from valve outlet. • Push the bypass valve (lubricate o-ring seals with silicone grease) into both…
Sometimes, a hard crust or salt bridge forms in the salt storage area. It is usually caused by high humidity or the wrong kind of salt. When the salt bridges…
Push tool into salt bridge to break Pencil mark Broom handle Salt Salt bridge Water level 1″–2″ IMPORTANT: Be sure small holes in the gasket are centered…
to start a recharge immediately, or at the next preset recharge start time. RECHARGE TONIGHT Touch (do not hold) the RECHARGE button. RECHARGE TONIGHT flashes…
When the water softening system is providing soft water, it is called “Service.” During service, hard water flows from the house main water pipe into the water…
Service When the water softening system is providing soft water, it is called “Service.” During service, hard water flows from the house main water pipe into…
of the water softening system. Brine (salt dissolved in water) is needed for each and every recharge. The water for making brine is metered into the salt…
Save time and money! Review the chart on the following pages first and you may not need to call for service. Problem Possible Causes What To Do No soft water…
What Is Not Covered: For The Period Of: We Will Replace: One Year Any part of the Water Softening System which fails due to a defect in materials or…
WARRANTOR IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES. Warrantor: MABE CANADA INC. All warranty service provided by our Factory Service Centers or an…