GE GNUT05Z user manual

Open PDFOpens the file on images.salsify.com.

Important Installation Recommendationsp. 1
Tools and Materials Required for Installation 2
Tools and Materials Required for Installationp. 2
Slotted and Phillips screw drivers • Pliers and adjustable jaw wrench • Hand or battery powered drill and 1⁄4² bit (saddle valve installation) • Electric drill…
Step-by-Step Installation Instructionsp. 1
— Feed water supply 3 — Electronic faucet installation 4 — Wall mounting 5 — Tubing connection 5 — Battery installation 5 — Filter cartridge installation 5…
Feed water supplyp. 3
Check and comply with local plumbing codes as you plan, then install a cold feed water supply fitting. For new home installation using standard plumbing…
Electronic faucet installationp. 4
Be sure there is room underneath the sink to make the needed connections. Select one of the following places to install the faucet: —IN an existing sink spray…
Wall mountingp. 5
MOUNTING BRACKET TO CABINET WALL The bracket can be used as a template for marking the location of the mounting screws. When determining the location of the…
Tubing connectionp. 5
s. MAKE TUBING CONNECTIONS 1. Run the length of 3⁄8² tubing, connected to the bottom of faucet, to the filter system outlet, Fig.1 on page 2. Allow enough…
Battery installationp. 5
Filter cartridge installationp. 5
OR REPLACEMENT CAUTION: Never remove sumps with water pressure in the filtration system. 1. Close the water supply/saddle valve (Fig. 1 and 2A) to the filter.…
Parts Listp. 6

Contents