Loading manual…
GE JVM1350SY installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 12
- Category
- Microwaves
- Models
- JVM1350SY
Open PDFOpens the file on images.salsify.com.
Contents
- Requirements for Installationp. 2
Important Safety Instructions This product requires a three-prong grounded outlet. The installer must perform a ground continuity check on the power outlet box…
- Electrical Requirementsp. 2
noted (under ELECTRICAL REQUIREMENTS), a qualified electrician should be employed to correct any deficiencies. CAUTION: For personal safety, remove house fuse…
- Mounting Spacep. 2
This section describes the space you need to install your microwave oven. Your Over-the-Range microwave oven requires mounting space on a wall as shown. 1. A…
- Overview of Installation Proceduresp. 3
PARTS INCLUDED You will find the installation hardware contained in a packet with the unit. Check to make sure you have all these parts. The installation…
- Tools You Will Needp. 3
Phillips screwdriver • Pencil • Ruler or tape measure and straight edge • Carpenter square (optional) • Tin snips (in some applications) • Electric drill with…
- Parts Includedp. 3
You will find the installation hardware contained in a packet with the unit. Check to make sure you have all these parts. The installation hardware (1–6)…
- Hood Exhaust Ductp. 4
Outside ventilation requires a HOOD EXHAUST DUCT. Read the following carefully. EXHAUST CONNECTION: The hood exhaust has been designed to mate with a standard…
- Remove the Mounting Platep. 5
The mounting plate comes attached to the back of the microwave oven. 1. Stand the microwave on its control panel side. Use a portion of the carton or some…
- Microwave Exhaust Ductp. 5
This microwave oven is designed for adaptation to the following three types of ventilation. NOTE: This microwave is shipped assembled for top exhaust (except…
- Adapting Microwave Blowerp. 5
A. OUTSIDE TOP EXHAUST (Vertical) This microwave oven is shipped assembled for top exhaust. However, you will need to make adjustments to assure proper…
- Preparation of Top Cabinetp. 9
You need to drill holes for the top support screws and a hole large enough for the power cord to fit through. • Read the instructions on the top cabinet…
- Attach the Mounting Plate to the Wallp. 9
Your microwave oven needs to be mounted against and supported by a flat, vertical wall. Wall construction should be a minimum of 2″ x 4″ wall studding and 3/8″…
- Mount the Microwave Ovenp. 10
- Installation Checklistp. 11
1. Make sure the microwave has been installed according to instructions. 2. Remove all packing material from the microwave oven. 3. Replace house fuse or turn…