Loading manual…
GE JBP66ABAA installation instructions
- Type
- Installation instructions
- Language
- English
- Pages
- 12
- Category
- Ovens & ranges
- Models
- EER3000EER3001JBP24JBP26JBP35JBP48JBP48BBBBJBP64JBP66JBP66ABAAJBP67JBP68
Open PDFOpens the file on images.salsify.com.
Contents
- BEFORE YOU BEGINp. 1
Read these instructions completely and carefully. • IMPORTANT — Save these instructions for local inspector’s use. • IMPORTANT — Observe all governing codes…
- ANTI-TIP DEVICEp. 1
WARNING — To reduce the risk of tipping, the appliance must be secured by properly installed Anti-Tip bracket packed with this appliance. If the Anti-Tip…
- PREPARE TO INSTALL THE RANGEp. 2
- TOOLS YOU WILL NEEDp. 2
MATERIALS YOU MAY NEED Anchor Sleeves Lag Bolts (For Anti-Tip Bracket Mounted on Concrete Floors Only) 3-Wire Cord 4‘ Long 4-Wire Cord OR 4‘ Long (UL Approved…
- MATERIALS YOU MAY NEEDp. 2
Anchor Sleeves Lag Bolts (For Anti-Tip Bracket Mounted on Concrete Floors Only) 3-Wire Cord 4‘ Long 4-Wire Cord OR 4‘ Long (UL Approved 40 AMP) Adjustable…
- PARTS INCLUDEDp. 2
Anti-Tip Bracket Kit REMOVE SHIPPING MATERIALS Remove packaging materials. Failure to remove packaging materials could result in damage to the appliance. 1…
- 1. REMOVE SHIPPING MATERIALSp. 2
- 2. PREPARE THE OPENINGp. 3
Installation Instructions PREPARE THE OPENING See illustrations for all rough-in and spacing dimensions. The range may be placed with 0” clearance (flush) at…
- ELECTRICAL CONNECTIONSp. 4
Use only a 3-conductor or a 4-conductor UL-listed range cord. These cords may be provided with ring terminals on wire and a strain relief device. A range cord…
- ELECTRICAL REQUIREMENTSp. 4
CAUTION: For personal safety, do not use an extension cord with this appliance. Remove house fuse or open circuit breaker before beginning installation. This…
- 3. POWER CORD AND STRAIN RELIEF INSTALLATIONp. 5
Installation Instructions POWER CORD AND STRAIN RELIEF INSTALLATION Remove the wire cover (on the back of the range) by removing five (5) screws using a 1/4”…
- 4. 3-WIRE POWER CORD INSTALLATIONp. 6
Installation Instructions ELECTRICAL CONNECTIONS (CONT.) 4-WIRE POWER CORD INSTALLATION WARNING: The neutral wire of the supply circuit must be connected to…
- 5. 4-WIRE POWER CORD INSTALLATIONp. 6
- 6. 3-WIRE CONDUIT INSTALLATIONp. 7
Installation Instructions 3-WIRE CONDUIT INSTALLATION Loosen the 3 lower terminal screws from the terminal block. Insert the center bare wire (white/neutral)…
- 7. 4-WIRE CONDUIT INSTALLATIONp. 7
- INSTALL THE RANGEp. 8
ANTI-TIP DEVICE INSTALLATION An Anti-Tip bracket is supplied with instructions for installation in a variety of locations. The instructions include all…
- 8. REPLACE THE WIRE COVERp. 8
- 9. ANTI-TIP DEVICE INSTALLATIONp. 8
- 10. REMOVE STORAGE DRAWERp. 8
- 11. LEVEL THE RANGEp. 9
LEVEL THE RANGE Install the oven shelves in the oven and position the range where it will be installed. Check for levelness by placing a spirit level or a cup…
- 12. REPLACE THE STORAGE DRAWERp. 9
- 13. FINAL INSTALLATION CHECKLISTp. 9
- 14. OPERATION CHECKLISTp. 9