Brother PT-H110 user manual

Contents

1. GETTING STARTEDp. 2

   Power Supply and Tape Cassette Open the cassette cover by pressing the above indicated area at the top end of the label maker. • Make sure you turn off the…

2. GETTING STARTED (Continued)p. 6

   This function allows you to set the brightness of the LCD. You can select from five levels of brightness. The default setting is [0]. • To change back to…

3. BASIC USAGEp. 6

   X Switching Upper Case/Lower Case Press to switch between upper and lower case text. Upper case ( ON) Lower case ( OFF) X Creating Two-Line Labels Move the…

4. BASIC USAGE (Continued)p. 8

   X Using Print Options [Numbering] You can print a series of up to nine labels at a time using auto-numbering. Using this feature you can automatically increase…

5. USING TEMPLATESp. 10

   This function allows you to create two types of cable labels. Example:Cable Label 1 NOTE • You cannot set label length when printing Cable Labels. • To clear…

6. FORMATTING KEYSp. 12

   Press to change the font settings. Press to change the size settings. Press to change the style settings. Press to select the frame design. See the Frame…

7. OTHERp. 13

   *1 Visit http://support.brother.com/ for the latest information about the recommended batteries. If the cutter blade becomes blunt after repetitive use and the…

8. HELPFUL HINTSp. 14

   X Error message X What to do when... Troubleshooting 6 Message Cause/Remedy Battery Low! The batteries are weak. If using AAA alkaline batteries: Replace them…

9. HELPFUL HINTS (continued)p. 15

   You can reset the label maker when you want to restore it to factory settings, or in the event it is not working correctly. All text, settings and stored files…