Loading manual…
Loading manual…
Read these instructions carefully and completely. • IMPORTANT—Save these instructions for local inspector’s use. • IMPORTANT—Observe all governing codes and…
Screws For Installation Metal Bottom Trim Plastic Bottom Trim Optional Metal Bottom Trim Assembly (on some models)
Strain Relief Clamp for 1/2” conduit Junction Box Wire Nuts 36” of String 31-10660 1-07 JR
1/8” Drill Bit and Electric or Hand Drill Phillips Screwdriver Parts Included Screws For Installation Metal Bottom Trim Plastic Bottom Trim Optional Metal…
Installation Instructions For Your Safety • Be sure your oven is installed properly by a qualified installer or service technician. • Be sure the oven is…
Door removal is not a requirement for installation of the product, but is an added convenience. To remove the door: Open the oven door as far as it will go.…
A NOTE: If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim…
ATTENTION INSTALLER All electric wall ovens must be hard wired (direct wired) into an approved junction box. A plug and receptacle is NOT permitted on these…
Drilling the Pilot Holes and Mounting the Oven a. Drill through the mounting holes (top and bottom) of the side trim, for the #8 screws provided. b. Secure the…
D NOTE: The oven door is heavy. You may need help lifting the door high enough to slide it into the hinge slots. Do not lift the door by the handle. D1 D2 D3…
Check that the bottom trim is installed properly (see page 9). Check to be sure the mounting screws are installed and flush with the side trim (see page 8).…
NOTE TO ELECTRICIAN: The power leads supplied with this appliance are UL recognized for connections to larger gauge household wiring. The insulation of these…