Loading manual…
Thermador CIT304YB user manual
- Type
- User manual
- Languages
- English, French
- Pages
- 24
- Category
- Cooktops & hobs
- Models
- CIT304YBCIT304YMCIT365YBCIT367YGCIT367YM
Open PDFOpens the file on content.abt.com.
Contents
- 1 IMPORTANT SAFETY INSTRUCTIONSp. 3
Read all instructions carefully before use. These precautions will reduce the risk of electrical shock, fire and injury to persons. When using kitchen…
- 1.1 Safety definitionsp. 3
Here you can find explanations of the safety signal words used in this manual. WARNING This indicates that death or serious injuries may occur as a result of…
- 1.2 General informationp. 3
Read this manual carefully. • Keep the instructions, the appliance pass and the product information safe for future reference or for the next owner. • Do not…
- 1.3 General safety instructionsp. 3
- 1.4 Appliance handling safetyp. 4
WARNING Hidden surfaces may have sharp edges. •Use caution when reaching behind or under appliance
- 1.5 Safety codes and standardsp. 4
This appliance complies with the latest version of one or more of the following standards: • UL 858 - Household Electric Ranges • CAN/CSA-E60335-2-6, The…
- 1.6 Electrical safetyp. 4
Installer - show the owner the location of the circuit breaker or fuse. Mark it for easy reference. • If required by the National Electrical Code (or Canadian…
- 1.7 State of California Proposition 65 Warningsp. 4
This product may contain a chemical known to the State of California, which can cause cancer or reproductive harm. Therefore, the packaging of your product may…
- 2 Before you beginp. 5
Before you beginRead these instructions before you begin to install your appliance
- 2.1 Parts includedp. 5
After unpacking all the parts, check for any damage in transit and for completeness of delivery
- 2.2 Tools and parts neededp. 5
Prepare these tools and accessories before you start to install your appliance. • Pencil • Measuring tape • Cross head screwdriver • Drill with bit 1/4" (6 mm)…
- 2.3 Cabinet requirementsp. 5
Ensure that the cabinetry at the installation location meets the requirements for a safe installation. • The distance from the top of the cooktop to the bottom…
- 2.4 Countertop requirementsp. 5
Ensure that the countertop into which the cooktop is to be installed meets these requirements for a safe installation. WARNING To reduce the risk of ignition…
- 3 Prepare installation spacep. 5
Prepare installation spaceCreate the cutout in the countertop according to the instructions. General countertop requirements: • The angle of the cut surface to…
- 3.1 Cutout dimensions for 30" cooktopsp. 6
Refer to these measurements for the models stated here. • CIT304YB • CIT304YM
- 3.2 Cutout dimensions for 36" cooktopsp. 6
- 3.3 Cabinet ventilation requirementsp. 6
To assure that the appliance works correctly, the cooktop MUST be sufficiently ventilated. The ventilation in the lower section of the appliance requires a…
- 4 Installation procedurep. 7
Installation procedureFollow these instructions to install the cooktop into the countertop. CAUTION Sharp edges. •Use protective gloves when installing the…
- 4.1 Installing the heat shieldp. 7
For safety reasons, the heat shield must be properly installed when closed cabinets are used. This prevents components from overheating as a result of the…
- 4.2 Securing the cooktop to the countertopp. 8
The cooktop must be secured from below using the holddown brackets provided, so it does not slip. 1. Place the cooktop face down on a soft underground. 2.…
- 5 Electrical connectionp. 8
Electrical connectionRead these instructions to safely connect your appliance to the electrical supply
- 5.1 Electrical requirementsp. 8
Ensure that the following general requirements are met. • You can find the rating plate with the electrical specifications on the underside of the appliance. →…
- 5.2 Connecting electrical supplyp. 8
WARNING Before installing, turn power OFF at the service panel. •Lock service panel to prevent power from being turned ON accidentally. Note: If the cooktop is…
- 6 Checking the installationp. 9
Checking the installationCheck if your unit is working properly after you have completed the installation steps. WARNING Before you turn on power supply, make…
- 7 Removing the appliancep. 9
Removing the appliance 1. Disconnect the appliance from the power supply. 2. NOTICE: Do not lever the appliance out from above at the frame. Push out the…
- 8 Customer Servicep. 9
Customer ServiceIf you have any questions on use, are unable to eliminate an issue in the appliance yourself, or the appliance needs to be repaired, please…
- 8.1 Model number (E-Nr.) and production number (FD)p. 9
You can find the model number (E-Nr.) and the production number (FD) on the appliance's rating plate. The model number (E-Nr.) can also be found on the glass…
- 8.2 Rating plate locationp. 9
You can find the rating plate of your appliance: • on the underside of the appliance • in the appliance pass • You can also check the Customer Service Index…