Samsung Bespoke 1.7 Cu. Ft. Smart Over the Range Microwave (ME90H1780RAA) installation instructions

Contents

1. Important safety instructionsp. 3

   This product requires a three-prong grounded outlet. The installer must perform a ground continuity check on the power outlet box before beginning the…

2. Electrical requirementsp. 3

   noted (under ELECTRICAL REQUIREMENTS), a qualified electrician should be employed to correct any deficiencies. CAUTION: For personal safety, remove the house…

3. Hood exhaustp. 4
4. Damage - Shipment/Installationp. 6

   HARDWARE PACKET PART QUANTITY Wood Screws (¼" x 2") 1 Toggle Bolts (and wing nuts) (3/16" x 3") 2 Self-aligning Machine Screws (¼" - 28 x 3 ¼") 2 You will find…

5. Parts includedp. 6
6. Tools you will needp. 7

   General information 30" 2" 30" min. Backsplash Bottom edge of the cabinet needs to be 30" or more from the cooking surface. NOTES: • The space between the…

7. Mounting spacep. 7

   66" or More from the Floor to the Top of the Microwave. DE68-04108A-09_IM_ME18H704SFB_AA_EN.indd 7 DE68-04108A-09_IM_ME18H704SFB_AA_EN.indd 7 2024-12-16 오후…

8. 1. Placement of the mounting platep. 8
9. A. Removing the microwave oven from the carton/Removing the mounting platep. 8

   1. Remove the installation instructions, Exhaust adaptor, filters, glass tray, and the small hardware bag. Do not remove the Styrofoam protecting the front of…

10. B. Finding the wall studsp. 8

    Wall Studs Center Center Wall Studs 1. Find the studs using one of the following methods: A. With a stud finder – a magnetic device which locates nails. OR B.…

11. C. Determining wall plate location under your cabinetp. 9

    Plate position – beneath a flat bottom cabinet. Draw a vertical line on the wall at the center of the 30" wide space. Tape the Rear Wall Template onto the wall…

12. D. Aligning the wall platep. 10

    Area E Hole B Hole A Centerline notches Draw a Vertical Line on Wall from Center of Top Cabinet Draw a Horizontal line on wall from bottom of “Rear Wall…

13. 2. Ventilation types (choose a, b or c)p. 11

    This microwave oven is compatible with the following three types of ventilation: A. Outside Top Exhaust (Vertical Duct) B. Recirculating (Non-Vented…

14. A. Outside top exhaust (vertical duct)p. 12
15. B. Recirculating (non-vented ductless)p. 12

    B1. ADAPTING THE MICROWAVE BLOWER FOR RECIRCULATION 1. Remove and save screw that holds blower plate to microwave. 2. Lift up the blower plate. Back of…

16. C. Outside back exhaust (horizontal duct)p. 14

    C1. ADAPTING THE MICROWAVE BLOWER FOR OUTSIDE BACK EXHAUST 1. Remove and save screw that holds blower Plate to microwave. Back of Microwave Oven Blower…

17. 3. Installationp. 15
18. A. Prepare the rear wall for outside back exhaustp. 15

    You need to cut an opening in the rear wall for outside exhaust. CL • Read the instructions for outside back exhaust on the REAR WALL TEMPLATE. • Tape the REAR…

19. B. Attach the mounting plate to the wallp. 15

    Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud. 1. Remove the toggle wings from the…

20. C. Use the top cabinet template to prepare the CABINET ABOVEp. 16

    You need to drill holes for the top support screws and a hole large enough for the power cord to fit through. • Read the instructions on the TOP CABINET…

21. D. Mount the microwave ovenp. 16
22. E. Connect THE ductwork for outside top exhaustp. 17

    House Duct 1. Extend the house duct down to connect to the exhaust adaptor. 2. Seal the exhaust duct joints using duct tape.…

23. 4. Before you use your microwavep. 18

Other documents for this model

• Samsung ME90H1780RAA user manual