Loading manual…
Maytag ADA 4.5 Cu. Ft. White Front Load Washer (MHW5630HW) installation instructions
- Type
- Installation instructions
- Languages
- English, French
- Pages
- 32
- Category
- Washing machines
- Models
- MHW5630HW
Open PDFOpens the file on content.abt.com.
Contents
- Washer Safetyp. 2
Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and…
- Internet Connectivity Guidep. 3
for Connected Appliances Only IMPORTANT: Proper installation of your appliance prior to use is your responsibility. Be sure to read and follow the installation…
- Choosing the Right Detergentp. 4
Use only High Efficiency detergents. The package will be marked “HE” or “High Efficiency.” Low-water washing creates excessive sudsing with a non-HE detergent.…
- Adding Laundry Productsp. 4
Adding HE detergent to basket: Single-dose laundry packets, Oxitype boosters, color-safe bleach, or scented crystals can be added to the drum prior to adding…
- Washer Maintenance and Carep. 5
Cleaning the Washer Location Keep washer area clear and free from items that would block airflow. This includes clearing piles of laundry in front of the washer
- Cleaning the Washer Locationp. 5
Keep washer area clear and free from items that would block airflow. This includes clearing piles of laundry in front of the washer
- Water Inlet Hosesp. 5
Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or…
- Washer Carep. 5
Recommendations to Help Keep Your Washer Clean and Performing at Its Best 1. Always use High Efficiency (HE) detergents and follow the HE detergent…
- Clean Washer Cycle Reminderp. 6
NOTE: Not all models have the Clean Washer with affresh® cycle reminder light. The Clean Washer with affresh® message will flash at the end of a wash cycle…
- Removing the Dispenserp. 6
Optimal Dispenser Drawer (on some models) To remove: 1. Pull dispenser drawer out until it stops. 2. Press down on the release tab and pull straight out to…
- Cleaning Load & Go™ Containers (on some models)p. 7
To replace: 1. Slide cover panel back onto posts on dispenser. 2. Align edges of dispenser with guides in washer; then slide dispenser back into slot.…
- Nonuse and Vacation Carep. 7
Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps: 1. Unplug or disconnect power to…
- Winter Storage Carep. 7
IMPORTANT: To avoid damage, install and store washer where it will not freeze. Because some water may stay in hoses, freezing can damage washer. If storing or…
- Transporting Your Washerp. 8
1. Shut off both water faucets. Disconnect and drain water inlet hoses. 2. If washer will be moved during freezing weather, follow “Winter Storage Care”…
- Reinstalling/Using Washer Againp. 8
WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure…
- Cleaning the Drain Pump/Draining Residual Water (on some models)p. 8
IMPORTANT: Make sure the washer is off before cleaning the drain pump filter. NOTE: Perform the following procedure occasionally. 1. Open the dispenser drawer…
- Additional Cleaningp. 9
Gently pull back the rubber door seal and clean any stained areas, soil buildup, or lint with the textured side of an affresh® Machine Cleaning Wipe
- Installation Instructionsp. 9
- Requirementsp. 9
Tools and Parts Gather required tools and parts before starting installation. Tools Needed: Adjustable or open end wrenches 1/2″ (13 mm), 5/8″ (16 mm), and…
- Tools and Partsp. 9
Gather required tools and parts before starting installation. Tools Needed: Adjustable or open end wrenches 1/2″ (13 mm), 5/8″ (16 mm), and 9/16″ (14.3 mm)…
- Location Requirementsp. 10
IMPORTANT: Do not install, store, or operate washer where it will be exposed to weather or in temperatures below 32°F (0°C). Water remaining in washer after…
- Drain Systemp. 11
It is the responsibility of the installer to install and secure the drain hose in to the provided plumbing/drain in a manner that will avoid the drain hose…
- Electrical Requirementsp. 12
- Installationp. 12
Unpacking WARNING Excessive Weight Hazard Use two or more people to move and install or uninstall appliance. Failure to do so can result in back or other…
- Unpackingp. 12
WARNING Excessive Weight Hazard Use two or more people to move and install or uninstall appliance. Failure to do so can result in back or other injury. 1. Move…
- Connect Drain Hosep. 13
4. Attach drain hose to drain port If clamp is not already in place on elbow end of drain hose, squeeze clamp with pliers and slide it over end of hose…
- Connect Inlet Hosesp. 14
IMPORTANT: To avoid leaks, check that your water inlet hoses have flat washers at both ends. Washer must be connected to water faucets with new inlet hoses…
- Level Washerp. 15
IMPORTANT: Leveling your washer properly reduces excess noise and vibration. 13. Check levelness of washer Remove cardboard from beneath washer. Place a level…