Loading manual…
Loading manual…
Mounting Height CAUTION • Be sure to check the mounting height before installing the product. • The mounting height is measured from the top of the range to…
3. Check the position for fixing the hood mounting bracket. 130 mm Screw Anchors (2 pcs.) or 30 mm Screw Anchors (2 pcs.) and Washers (2 pcs.) 4. Fix the hood…
1. Be sure to check that the product you have purchased is suitable for the installation space you have chosen. 24 1/64 " – 35 63/64 " (61.0 cm – 91.4 cm) 26…
/ Overview Range Hood Description
Button panel 02 03 01 01 Power button • Short press: Turns the device ON/OFF. 02 Mode button • Short press: Changes the operation mode. (Low Medium High…
03 01 01 Power button • Short press: Turns the device ON/OFF. 02 Mode button • Short press: Changes the operation mode. (Low Medium High (Boost)) • 5 second…
Activates/Deactivates Boost mode Boost mode is a function that allows powerful exhaust for a short time. 1. Press the button for 10 seconds. 2. Boost mode has…
The device turns on with a chime sound, and starts operation in Low mode. Changing the operation mode Change the device operation mode as necessary. • Press…
Cleaning the Filters 1. Please remove the filter at the bottom of the hood. CAUTION When separating the filter, use both hands to separate it carefully so that…
Wipe the front of the product with a soft cloth soaked in neutral liquid detergent. CAUTION • Do not use rough materials such as sponges. • Do not use baking…
Checking the power connections Check if the power is connected to the product and the access point. Setting up and connecting to a Wi-Fi access point using…
The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after…
If you suspect there is a failure while using the product, check the following before requesting service from the service center. When you request service, you…
Problem Cause Action It's not working. Is the power being supplied like normal? Please check if there is a power outage. Please unplug and plug in the power…
Code Description Action C446 BLDC Motor or Inverter PBA is not working Press the POWER button to restart the product. If the problem persists, disconnect the…
SAMSUNG RANGE HOOD LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics Canada, Inc. (SAMSUNG)…