Loading manual…
Loading manual…
Before You Start Supplies For most installations, the basic supplies you will need are: DRY2586N_SVG 8 7 6 5 4 3 2 1 1. Wrench 2. 1/4 inch Driver 3.…
Supplies For most installations, the basic supplies you will need are: DRY2586N_SVG 8 7 6 5 4 3 2 1 1. Wrench 2. 1/4 inch Driver 3. Screwdrivers 4. Level 5.…
1. Install dryer before washer. This allows room for attaching exhaust duct. 2. Select a location with a solid floor. Dryers installed in residential garages…
If re-using the washer fill hose filter screen on an already installed washing machine, it must be cleaned before installing the steam connection. Turn on the…
WARNING To reduce the risk of fire and combustion gas accumulation the dryer MUST be exhausted to the outdoors. W604 WARNING To reduce the risk of fire and the…
WARNING To reduce the risk of gas leaks, fire or explosion: • The dryer must be connected to the type of gas as shown on nameplate located in the door recess.…
Dryer requires 120/240 Volt or 120/208 Volt, 60 Hertz, 3 or 4 wire electrical supply. Refer to serial plate for specific electrical requirements. IMPORTANT…
NOTE: Doors with windows cannot be reversed. Installation © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 20 Part No. D518518ENR2
Before using dryer for the first time, use an all-purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside…
This appliance is to be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA. WARNING The appliance…
Refer to Installer Checklist on the back cover of this manual and make sure that dryer is installed correctly
Fast Track for Installing the Dryer 1 Position and Level the Dryer. DRY2634N_SVG 6 Reverse Door, if Desired. D675I_SVG1 CHECK CHECK 2 STEAM MODELS ONLY Connect…