AG Neovo X-17E user manual

Contents

1. Federal Communications Commission (FCC) Notice (U.S. Only)p. 4

   X-19E This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are…

2. WEEEp. 4

   Information for users applicable in European Union countries. The symbol on the product or its packaging signifies that this product has to be disposed…

3. Noticep. 5

   Read this User Manual carefully before using the LCD display and keep it for future reference. • The product specifications and other information provided in…

4. Cautions When Setting Upp. 5

   Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct sunlight. Do not cover or block the ventilation holes in the…

5. Cautions When Usingp. 6

   Use only the power cord supplied with the LCD display. The power outlet should be installed near the LCD display and be easily accessible. If an extension cord…

6. Cleaning and Maintenancep. 6

   The LCD display comes with NeoVTM Optical Glass. Use a soft cloth lightly moistened with a mild detergent solution to clean the glass surface and the housing.…

7. Notice for the LCD Displayp. 7

   In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the…

8. Chapter 1: Product Descriptionp. 8

   1.1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. Quick…

9. 1.1 Package Contentsp. 8

   When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. Quick Start Guide Power…

10. 1.2 Wall Mounting Installation Preparationp. 9

    1.2.1 Wall Mounting 1 Remove the base stand. See procedures below. 2 Wall mount the LCD display. Screw the mounting bracket to the VESA holes at the rear of…

11. 1.3 LCD Display Overviewp. 10

    1.3.1 Front View and Keypad Buttons 6 4 7 5 9 8 2 3 1 Display screen The LCD display screen is protected by NeoVTM Optical Glass. Green - Power on Amber -…

12. 2.1 Connecting the Powerp. 12

    Connect the power cord to the power adapter. 2 Connect the power adapter to the DC power input at the rear of the LCD display. 3 Connect the power cord plug to…

13. 2.2 Connecting Input Source Signalsp. 13

    2.2.1 Connecting a Computer Using VGA Cables Connect one end of a D-sub cable to the VGA connector of the LCD display and the other end to the D-sub connector…

14. 3.1 Turning on the Powerp. 16

    Note: ♦ The LCD display still consumes power as long as the power cord is connected to the power outlet. Disconnect the power cord to completely cut off power.…

15. 3.2 Selecting the Input Source Signalp. 16
16. 3.3 Adjusting the Volumep. 17

    3.4 Locking the OSD Menu Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the keypad. To lock the OSD, press…

17. 3.4 Locking the OSD Menup. 17

    Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the keypad. To lock the OSD, press and hold the keypad…

18. 3.5 Using Picture-in-Picture (PIP)p. 18

    The Picture-in-Picture (PIP) feature allows viewing of more than one input source signal on the LCD display. 3.5.1 PIP Options Touch the p button repeatedly to…

19. 3.6 Using Auto Adjustment Functionp. 19

    Auto Adjustment function automatically tunes the LCD display to its optimal setting, including horizontal position, vertical position, clock, and phase. Touch…

20. 4.1 Using the OSD Menup. 20
21. 4.2 OSD Menu Treep. 22
22. 5.1 Brightnessp. 25
23. 5.2 COLOUR TEMPp. 27
24. 5.3 IMAGE SETTINGp. 28
25. 5.4 ASPECT RATIOp. 31
26. 5.5 PIP Settingp. 32
27. 5.6 Anti-Burn-Inp. 34
28. 5.7 OSD Settingp. 35
29. 5.8 Audio Settingp. 36
30. 5.9 SYSTEMp. 37