AG Neovo X-24E (X24E0011E0100) user manual

Contents

1. Safety Informationp. 4

   This FCC Class-B compliant digital device complies with the Interference-Causing Equipment Regulations of Canada

2. FCC Declaimersp. 4

   This device complies with Section 15 of the FCC listing. The operation procedures must meet the following conditions: (1) the device must not cause any…

3. WEEEp. 5

   Information for users applicable in European Union countries. The symbol on the product or its packaging signifies that this product has to be disposed…

4. Precautionsp. 6

   CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal…

5. Noticep. 6

   Read this User Manual carefully before using the LCD display and keep it for future reference. • The product specifications and other information provided in…

6. Cautions When Setting Upp. 6

   Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct sunlight. Do not cover or block the ventilation holes in the…

7. Cautions When Usingp. 7

   Use only the power cord supplied with the LCD display. The power outlet should be installed near the LCD display and be easily accessible. If an extension cord…

8. Cleaning and Maintenancep. 7

   The LCD display comes with NeoVTM Optical Glass. Use a soft cloth lightly moistened with a mild detergent solution to clean the glass surface and the housing.…

9. Notice for the LCD Displayp. 8

   In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the…

10. Chapter 1: Product Descriptionp. 9

    1.1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. User…

11. 1.1 Package Contentsp. 9

    When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. User Manual Power cord…

12. 1.2 Wall Mounting Installation Preparationp. 10

    1.2.1 Wall Mounting 1 Remove the base stand. See procedures below. 2 Wall mount the LCD display. Screw the mounting bracket to the VESA holes at the rear of…

13. 1.3 LCD Display Overviewp. 11

    1.3.1 Front View and Keypad Buttons 1 6 4 7 5 9 8 2 3 1 Display screen The LCD display screen is protected by NeoVTM Optical Glass. 5 UP Hot Key: PIP Select •…

14. Chapter 2: Making Connectionsp. 13

    2.1 Connecting the Power 1 Connect the power cord to the power adapter. 2 Connect the power adapter to the DC power input at the rear of the LCD display. 3…

15. 2.1 Connecting the Powerp. 13

    Connect the power cord to the power adapter. 2 Connect the power adapter to the DC power input at the rear of the LCD display. 3 Connect the power cord plug to…

16. 2.2 Connecting Input Source Signalsp. 14

    2.2.1 Connecting a Computer Using VGA Cables Connect one end of a D-sub cable to the VGA connector of the LCD display and the other end to the D-sub connector…

17. Chapter 3: Using the LCD Displayp. 17

    3.1 Turning on the Power 1 Plug the power cord to a power outlet or power supply. 2 Touch the POWER button to turn the LCD display on. The LED indicator turns…

18. 3.1 Turning on the Powerp. 17

    Plug the power cord to a power outlet or power supply. 2 Touch the POWER button to turn the LCD display on. The LED indicator turns GREEN. When the LCD display…

19. 3.2 Selecting the Input Source Signalp. 17

    Notes: ♦♦ This function works only if SOURCE DETECT is set to MANUAL. Refer to page 38. ♦♦ After selecting an input source signal, the input source signal…

20. 3.3 Adjusting the Volumep. 18

    Touch the t or u button to call out the volume bar. 2 Touch the u button to increase volume or the t button to decrease volume. To mute the audio, set the…

21. 3.4 Locking the OSD Menup. 18

    Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the keypad. To lock the OSD, press and hold the keypad…

22. 3.5 Using Picture-in-Picture (PIP)p. 19

    The Picture-in-Picture (PIP) feature allows viewing of more than one input source signal on the LCD display. 3.5.1 PIP Options Touch the p button repeatedly to…

23. 3.6 Using Auto Adjustment Functionp. 20

    Auto Adjustment function automatically tunes the LCD display to its optimal setting, including horizontal position, vertical position, clock, and phase. Touch…

24. Chapter 4: On Screen Display Menup. 21
25. 4.1 Using the OSD Menup. 21
26. 4.2 OSD Menu Treep. 23
27. Chapter 5: Adjusting the LCD Displayp. 26
28. 5.1 Brightnessp. 26
29. 5.2 COLOUR TEMPp. 28
30. 5.3 IMAGE SETTINGp. 29