iiyama XUB2792QSU-B1 user manual

Contents

1. FOR YOUR SAFETYp. 5

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 7

   NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. WALL MOUNTINGp. 9

   , in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer…

4. FITTING AND REMOVAL OF BASE : ProLite XUB2792QSUp. 10

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

5. FITTING AND REMOVAL OF BASE : ProLite XU2792QSUp. 11
6. CONTROLS AND CONNECTORS : ProLite XU2792QSUp. 13

   <Front> <Back> NOTE NOTE Power Indicator Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (ENTER) Scroll Up / Volume…

7. CONNECTING YOUR MONITOR : ProLite XUB2792QSUp. 14

   Ensure that both the computer and the monitor are switched off . Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

8. CONNECTING YOUR MONITOR : ProLite XU2792QSUp. 15
9. COMPUTER SETTINGp. 16

    For optimal viewing it is recommended to look at the full face of the monitor.  Hold the stand so that the monitor does not topple when you change the…

10. ADJUSTING THE VIEWING ANGLE : ProLite XU2792QSUp. 16

    NOTE  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  Careful attention is required not to catch your fi…

11. ProLite XUB2792QSUp. 17

     For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to…

12. PANEL ROTATION : ProLite XUB2792QSUp. 17

    Adjust the mother’s height. Rotate the panel 90 degrees. Portrait: Turn clockwise. Landscape: Turn counter clockwise.  Attempting to rotate without fully…

13. OPERATING THE MONITORp. 18

    To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 28. You are also able to adjust the…

14. ADJUSTMENT MENU CONTENTSp. 19

    Adjustment Item Problem / Option Button to Press Picture Adjust * 3 Too dark Too bright Brightness * 1,2,4 Contrast * 2 Too dull Too intense * 1 Adjust the…

15. POWER MANAGEMENT FEATUREp. 26

    may not work properly. NOTE POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer…

16. TROUBLE SHOOTINGp. 27

    TROUBLE SHOOTING 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip…

17. RECYCLING INFORMATIONp. 28

    The screen is shaking. The power voltage is within the specifi cation of the monitor. The signal timing of the computer is within the specifi cation of the…

18. APPENDIXp. 29

    APPENDIX Design and specifi cations are subject to change without prior notice

19. SPECIFICATIONS : ProLite XUB2792QSUp. 29

    * Audio/USB equipment is not connected. NOTE LCD Panel Panel Technology IPS Panel Technology 0.233mm H × 0.233mm V Response time Pixel pitch 5ms (Gray to Gray)…

20. SPECIFICATIONS : ProLite XU2792QSUp. 30
21. DIMENSIONS : ProLite XUB2792QSUp. 31

    605.5mm/23.8” 611.0mm/24.0” 341.0mm/13.4” 371.5mm/14.6” 54.0mm/2.1” 397.0mm/16.2”(527.0mm/21.5”) 300.0mm/11.8” 230.0mm/9.1” 605.5mm/23.8” 611.0mm/24.0”…

22. DIMENSIONS : ProLite XU2792QSUp. 31
23. COMPLIANT TIMINGp. 32

    Dot Clock 25.175MHz 40.000MHz 65.000MHz 108.000MHz 162.000MHz 146.250MHz 148.500MHz 241.500MHz 274.680MHz Vertical Frequency 59.940Hz 60.317Hz 60.004Hz…