Kodak ScanMate i940 (1960988) user manual

Contents

1. Scanning Setup Guide for the ISIS Driverp. 2
2. Starting the Scan Validation Toolp. 3

   1. Select Start>Programs>Kodak>Document Imaging>Scan Validation Tool. 2. Select ISIS for the Driver Type and the KODAK i920 as the driver and click OK. 3.…

3. The Scan Validation Tool dialog boxp. 5

   The Scan Validation Tool (SVT) is a diagnostic application provided by Kodak. The SVT user interface allows access to all the features of the scanner and is a…

4. Configuring Image settingsp. 7

   The main ISIS Driver window provides a set of default tabs for configuring images. You can select each of these tabs and make any choices necessary to meet…

5. Main tabp. 9

   The Main tab provides the following options. Dots per inch (dpi) or resolution ⎯ indicates the scanning resolution, which largely determines the quality of the…

6. Layout tabp. 11

   The Layout tab provides these options. Page Size ⎯ the default page size is set when a scanner is first selected. You can choose a different page size using…

7. Scan Area dialog boxp. 12

   The Scan Area dialog box allows you to define the amount of image data which is returned to your PC. NOTE: Select the side and image to be defined by…

8. Image Processing tabp. 13

   The Image Processing tab provides these options. General Options • Deskew ⎯ automatically straightens a document within ±0.3 degrees of the leading edge of the…

9. Dropout tabp. 15

   The Dropout tab provides these options. The Dropout tab is used to eliminate a form's background so that only the entered data is included in the electronic…

10. Adjustments tabp. 16

    The Adjustments tab provides the following options. Brightness and Contrast • (none) • Manual: allows you to set specific values that will be used for all…

11. Image Edge Fill tabp. 18

    The Image Edge Fill tab provides the following options. Image Edge Fill — fills the edges of the final electronic image by covering the area with the specified…

12. Blank Image Detection tabp. 19

    Blank Image Detection provides the following options. Blank Image Detection — allows you to configure the scanner to not give blank images to the scanning…

13. Configuring Scanner settingsp. 20

    To access scanner settings from the ISIS Driver, go into the Scan Validation Tool as described earlier in this guide and access the ISIS Driver. • Click…

14. Scanner tabp. 21

    The Scanner tab provides the following options. Document Feeder Paper Source: ADF — the scanner will only scan documents from the input tray. Sheet Counter —…

15. Multifeed Detection tabp. 22

    The Multifeed tab provides the following options. Multifeed Detection Length Detection ⎯ this option can be enabled or disabled. The default is disabled. If…

16. About tabp. 23

    Displays information about your scanner and driver.

Other documents for this model

• Kodak ScanMate i940 (1960988) user manual