Loading manual…
Loading manual…
SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries.…
DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation…
Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage. General safety • Adhere to all national and local electrical…
For additional specifications, refer to the APC Web site at www.apc.com. Environmental specifications Note: The recommended recharge interval for this UPS is…
Front panel display features SMTL750RM2UC and SMTL1000RM2UC Display (more information below) Bezel Bezel Screws Battery Battery Door Battery Door…
For UPS installation information, refer to the Installation Guide included with the UPS. Placement The UPS is intended for IT environments. Avoid placement…
Using the display These Smart-UPS models are equipped with an intuitive and configurable LCD display. This display complements the software interface as they…
General configuration settings Configuration settings may be changed at any time using the LCD interface or PowerChute software. This table provides a brief…
Problem and Possible Cause Solution The UPS will not turn on or there is no output. The unit has not been turned on. Press the ON key once to turn on the UPS.…
Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of five(5) years from the…
1. Shut down and disconnect all equipment. 2. Disconnect the unit from utility power. 3. Disconnect all internal and external batteries (if applicable). 4.…
section of this manual. Service If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the…